|Pass Through Data Rates:||
1-Port 10/100 Mbps
|Country of Manufacture:||
|Max. Data Transfer Rate:||
|Input Power Voltage:||
All items on sale are described as accurate as possible to the best of our abilities. Please thoroughly check the item’s photos and specifications carefully to know it completely and clearly. Any questions or things uncertain or you really concern, please email us to confirm or consult. We welcome questions and enquiry from customer and we always response and offer our professional feedback within 24 hours.
Product Overview of PoE5912-AT
The Gigabit Power over Ethernet Splitter (PoE-5912G-AT) splits a networked PoE signal into separated power and Gigabit
data sources. This device allows administrators to run Gigabit speed PoE cables over long distances and then split the PoE
signal into separated data and power sources in order to network non-PoE devices.
Save installation and equipment cost when installing access points, IP cameras and more in remote locations. No need to
install network devices near a power outlet. This compact device safeguards valuable network equipment with short circuit
protection and quickly creates an integrated PoE and non PoE network at Gigabit speeds.
Product Features of PoE5912-AT
Network devices at Gigabit speeds all within a compact device
Product Specifications of PoE5912
Data Rate :10/100
Input Power Requirement: 1/2(+),3/6 (–) or 4/5(+),7/8(-)
Input Power Voltage:
Jumper Cable: DC 2.1x5.5x 9.5mm, (L-300mm)
Dimensions: 80 mm x 55 mm x 31 mm
Diagnostic LEDs: DC Power (Green)
Connectors: Shielded RJ-45, EIA 568A and 568B
Environmental Conditions : Operating Ambient Temperature: -10 to 45℃
Regulatory IEEE 802.3at, IEEE 802.3af,
Compliance RoHS Compliant , CE
Safety Approvals CE,FCC,EN 60950:2006
From Left to Right, The Housing of PSE803, PSE802, PSE801
The Naming Rules of PSE 1-PoE Port/Single POE Splitters
PSE 1-PoE Port/Single POE Splitters
Note: 1. For the Single POE Injector/Switch on sale at this page, it is PSE802G-TE so its specifications is in the GREEN Frame and ONLY the PSE802G-TE is related directly to the product available On Sale at this page. The whole chart above is for complete and better undersanding of PSE series PoE Injectors available from our store so that the customer can choose the proper product.
IP Cameras (PoE Module inside) and PoE Equipment
1. IP Cameras (PoE Module inside) and PoE Injector
2. IP Cameras (PoE Module inside) and PoE Switch
3. IP Cameras (Without PoE Module inside) and PoE Injector/Splitter
Network Video Surveillance System = 1*IPC or Multi-IPC + PC in LAN or NVR in LAN + Internet WAN
The Free UC Video Surveillance Software in disc is is a functionally powerful and easy monitoring software for simple or complicated Network Video Surveillance System establishment.We have detailed with both pictures&written explanations for UC software operations.
The only one camera can be seen and managed by UC software or Web IE brower in LAN or by remote visit through WAN. The video recorded by the camera can be stored on the PC in LAN.
Multiple cameras can be seen and managed by UC software or Web IE brower in LAN or by remote visit through WAN. The video recorded by the cameras can be stored on the PC in LAN.
Multiple cameras can be seen and managed by NVR software or UC software or Web IE brower in LAN or by remote visit through WAN. The video recorded by the cameras can be stored on the NVRs in LAN.
Multiple NVRs in different LAN can be seen and managed by NVMS software in PC by remote visit through WAN. The video recorded by the cameras can be stored on the NVR in LAN.