Switch Layer3 Managed Cisco C1200-8P-E-2G | 8 Port PoE+ | 2x Gigabit Rj45/SFP combo ports | 67W PoE

banner

DANH MỤC SẢN PHẨM

Switch Layer3 Managed Cisco C1200-8P-E-2G | 8 Port PoE+ | 2x Gigabit Rj45/SFP combo ports | 67W PoE

Switch Layer3 Managed Cisco C1200-8P-E-2G | 8 Port PoE+ | 2x Gigabit Rj45/SFP combo ports | 67W PoE

Mã SP: C1200-8P-E-2G

Lượt xem: 35 lượt

0 đánh giá

Switch Layer 3, Managed, Rack-Mount, Desktop
(8) Cổng PoE+ 1Gb, Tổng Công Suất PoE 67W
(2) Cổng Rj45/SFP Combo 1Gb, (1) Cổng Console USB-A và RJ45
Hỗ trợ (1) port PoE input (802.3af) trên port 1 hoặc AC power
Hỗ trợ tối đa 256 VLANs và 4094 VLAN IDs
Quản Lý dễ dàng CLi, SSH, Telnet, Web Gui, App mobile, Cloud
Giá khuyến mại: Liên hệ

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Switch Layer3 Managed Cisco C1200-8P-E-2G | 8 Port PoE+ | 2x Gigabit Rj45/SFP combo ports | 67W PoE

1. Giới Thiệu

C1200-8P-E-2G là một mã sản phẩm trong dòng Switch Cisco Catalyst 1200 Series từ thương hiệu Cisco. Đây là thiết bị chuyển mạch có 8 cổng 10/100/1000Mbps, có khả năng cấp nguồn PoE+ và 2 cổng chạy combo RJ45 hoặc SFP Uplink. C1200-8P-E-2G được thiết kế nhỏ gọn không quạt, chạy yên tĩnh phù hợp trong văn phòng doanh nghiệp vừa và nhỏ, cung cấp kết nối nhanh chóng, an toàn tới các thiết bị máy tính, máy in, máy chủ, wifi, camera và nhiều các thiết bị khác.

 

Tuy là bộ chuyển mạch nhỏ bé hay gọi là Switch Desktop nhưng có hiệu suất ấn tượng. Nó cung cấp khả năng chuyển mạch 20 Gbps, tốc độ truyền gói tin 14.88 mpps tương đương truyền 14.88 triệu gói tin trên 1 giây, hoàn toàn đáp ứng nhu cầu truyền nhận gói tin trơn tru ổn định.

Switch còn được quản lý bằng dòng lệnh CLI hoặc bảng điều khiển của Cisco qua giao diện Web và App Mobile. Các văn phòng hay doanh nghiệp nhỏ sẽ được sử dụng các tính năng nâng cao như Vlans, Routing.. trên C1200-8P-E-2G với mức giá phải chăng mà chỉ có trên các thiết bị chuyển mạch Layer 3 đắt tiền khác. 

2. Các đặc điểm nổi bật của Cisco C1200-8P-E-2G

Switch Cisco C1200-8P-E-2G cung cấp đầy đủ các cổng kết nối và các tính năng để xây dựng hệ thống mạng hiện đại, với mức chi phí đầu tư vô cùng hợp lý. Sau đây là một số các đặc điểm nổi bật bạn cần biết:

 

  • Có 8 cổng RJ45 gigabit ethernet tốc độ 10/100/1000Mbps cho các kết nối LAN hỗ trợ cấp nguồn PoE và 2 cổng SFP chạy kết hợp với RJ45 để mở rộng mạng ở các khu vực xa hơn.
  • Switch được quản lý dễ dàng trực quan qua bảng điều khiển của Cisco trên giao diện web hoặc APP mobile, C1200-8P-E-2G cũng hỗ trợ cấu hình đầy đủ các tính năng thông qua giao diện dòng lệnh CLI.
  • Cung cấp các tính năng VLAN, Access và trunking ports giúp tăng cường bảo mật mạng, tăng cường hiệu suất, cho phép quản trị viên mạng quản lý và cấu hình mạng một cách linh hoạt hơn, cho phép họ tăng cường hoặc thay đổi cấu trúc mạng mà không ảnh hưởng đến toàn bộ hệ thống.
  • Switch C1200-8P-E-2G có tính năng Routing nâng cao của Switch Layer 3, hỗ trợ lên tơi 32 static route và 16 IP interfaces.
  • Bộ chuyển mạch có thiết kế nhỏ gọn, không quạt, rất linh hoạt để triển khai lắp đặt trong hoặc ngoài tủ mạng tại nơi làm việc, đặc biệt tại nơi có không gian lắp đặt hạn chế. Switch C1200-8P-E-2G hoạt động rất yên tĩnh và không gây ra tiếng ồn đáng kể. Điều này rất hữu ích trong môi trường làm việc yêu cầu sự yên tĩnh như văn phòng, nơi mà tiếng ồn có thể làm giảm hiệu suất làm việc và gây phiền hà cho người sử dụng.
  • Bộ chuyển mạch C1200-8P-E-2G được tích hợp các tính năng bảo mật mạng, giúp giảm thiểu rủi ro của các cuộc tấn công mạng. Các tính năng này có thể bao gồm các công cụ và cơ chế bảo mật như tường lửa, kiểm soát truy cập, mã hóa và giám sát lưu lượng mạng. Ví dụ: IEEE 802.1X port security, chống các cuộc tấn công từ chối dịch vụ (DoS), kiểm soát lưu lượng mạng ACLs.
  • Giải pháp cắm và chạy (Plug and Play) trên Switch Cisco C1200-8P-E-2G, đáp ứng các kết nối mạng Lan ngay lập tức mà không cần cấu hình. Giúp giảm thiểu thời gian và công sức cần thiết cho việc cài đặt và triển khai mạng, đồng thời tăng cường tính linh hoạt và dễ sử dụng.

3. Tính năng và lợi ích của Switch Cisco C1200-8P-E-2G

Ngoài những đặc điểm nổi bật chúng tôi nêu ở trên, Cisco C1200-8P-E-2G còn cung cấp tất cả các tính năng bạn cần để tạo nên hệ thống mạng cấp doanh nghiệp quy mô vừa và nhỏ với mức giá phải chăng. Những tính năng này bao gồm:

3.1. Quản lý và cấu hình dễ dàng

Bộ chuyển mạch 1200 Series được thiết kế để dễ dàng triển khai và sử dụng bởi các doanh nghiệp vừa và nhỏ:

  • Bảng điều khiển doanh nghiệp của Cisco được thiết kế để quản lý các thiết bị chuyển mạch 1200 Series và cho phép bạn dễ dàng tùy chỉnh giao diện cũng như các tiện ích để chủ động quản lý mạng của mình. Các thiết bị chuyển mạch hỗ trợ phần mềm tích hợp sẵn được quản lý trực tiếp, loại bỏ nhu cầu thiết lập phần cứng hoặc máy ảo riêng biệt tại chỗ. Trình hướng dẫn tích hợp thiết bị giúp đơn giản hóa việc thiết lập và đưa các thiết bị mới vào mạng. 
  • Giải pháp Cắm và Chạy Mạng của Cisco cung cấp giải pháp đơn giản, an toàn, thống nhất và tích hợp để dễ dàng triển khai thiết bị mới hoặc cung cấp các bản cập nhật cho mạng hiện có. Giải pháp này cung cấp một cách tiếp cận thống nhất để cung cấp cho bộ định tuyến, thiết bị chuyển mạch và thiết bị không dây của Cisco với trải nghiệm triển khai gần như không cần chạm.
  • Giao diện người dùng web hiện đại được thiết kế lại giúp giảm thời gian cần thiết để triển khai, khắc phục sự cố và quản lý mạng. Trình hướng dẫn cấu hình đơn giản hóa các tác vụ cấu hình phổ biến nhất và cung cấp công cụ tối ưu cho bất kỳ ai thiết lập và quản lý mạng.
  • Bộ chuyển mạch hỗ trợ khóa Bluetooth bên ngoài cắm vào cổng USB trên bộ chuyển mạch và cho phép kết nối RF dựa trên Bluetooth với máy tính xách tay và máy tính bảng bên ngoài. Máy tính xách tay và máy tính bảng có thể truy cập vào bộ chuyển đổi Giao diện dòng lệnh (CLI) bằng ứng dụng khách Telnet hoặc Secure Shell (SSH) qua Bluetooth. GUI có thể được truy cập qua Bluetooth bằng trình duyệt.

3.2. Độ tin cậy và hiệu suất

Thiết bị chuyển mạch dòng Cisco Catalyst 1200 đã được thử nghiệm nghiêm ngặt trước khi sản phẩm tới tay người dùng, để mang lại hiệu suất và độ tin cậy cao mà bạn mong đợi từ thiết bị chuyển mạch Cisco và giúp bạn ngăn chặn thời gian ngừng hoạt động gây thiệt hại tới hoạt động kinh doanh của doanh nghiệp. Bộ chuyển mạch tăng tốc thời gian truyền tệp, cải thiện mạng chậm và chậm, giữ cho các ứng dụng kinh doanh quan trọng của bạn luôn sẵn sàng và giúp nhân viên của bạn phản hồi nhanh hơn với khách hàng và với nhau. Với mạng dựa trên thiết bị chuyển mạch Catalyst 1200 Series, bạn có thể giải quyết tất cả các nhu cầu kết nối và liên lạc trong doanh nghiệp của mình, đồng thời giảm tổng chi phí sở hữu cơ sở hạ tầng công nghệ của mình.

3.3. Định tuyến tĩnh Layer 3

Khả năng này cho phép bạn phân đoạn mạng của mình thành các nhóm làm việc riêng biệt và liên lạc qua các Vlan mà không làm giảm hiệu suất ứng dụng. Do đó, bạn có thể quản lý định tuyến nội bộ bằng bộ chuyển mạch của mình và dành bộ định tuyến cho lưu lượng truy cập và bảo mật bên ngoài, giúp mạng của bạn chạy hiệu quả hơn.

3.4. Cấp nguồn qua Ethernet

Bộ chuyển mạch C1200-8P-E-2G dòng Cisco Catalyst 1200 Series có sẵn PoE+ trên các mẫu Gigabit Ethernet. Khả năng này cho phép bạn triển khai điện thoại IP, mạng không dây, giám sát video và các giải pháp khác chỉ bằng một cáp mạng, từ đó loại bỏ nhu cầu sử dụng nguồn điện hoặc cáp riêng. PoE+ cung cấp công suất lên tới 30W trên mỗi cổng, lý tưởng để triển khai các điểm truy cập không dây 802.11ac, camera IP Pan-Tilt-Zoom (PTZ), điện thoại video và các thiết bị thin client devices, mang lại sự linh hoạt và giảm chi phí đầu tư trong việc triển khai các giải pháp mạng.

3.5. Bảo mật mạng

Switch C1200-8P-E-2G trong dòng 1200 Series cung cấp tính năng bảo mật tích hợp và quản lý mạng để đảm bảo mức độ bảo mật cao cho doanh nghiệp, ngăn chặn người dùng không được ủy quyền truy cập vào mạng và bảo vệ dữ liệu doanh nghiệp. Các tính năng bao gồm tính năng bảo mật mạng tích hợp để giảm nguy cơ của các cuộc tấn công, kiểm soát truy cập vào mạng thông qua IEEE 802.1X, phòng ngừa tấn công từ chối dịch vụ (DoS) để tăng thời gian hoạt động của mạng, và danh sách kiểm soát truy cập (ACLs) để bảo vệ các phần nhạy cảm của mạng khỏi người dùng không được ủy quyền và ngăn chặn các cuộc tấn công mạng.

3.6. Tiết kiệm năng lượng, bảo vệ môi trường

Switch Cisco C1200-8P-E-2G được thiết kế để tiết kiệm năng lượng và bảo vệ môi trường mà không làm giảm hiệu suất. Chúng hỗ trợ tiêu chuẩn Energy Efficient Ethernet (IEEE 802.3az) để giảm tiêu thụ năng lượng, tự động tắt nguồn trên các cổng khi không có liên kết, và có thiết kế không quạt giúp giảm tiêu thụ điện và hoạt động yên tĩnh.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

Download Cisco C1200 Series Datasheets ⇓

Product specifications
C1200-8P-E-2G 8x 10/100/1000 PoE+ ports with 67W power budget 2x Gigabit copper/SFP combo ports Rack-mountable
Total system ports 10x Gigabit Ethernet
RJ-45 ports 8x Gigabit Ethernet
Combo ports (RJ-45 + SFP) 2x Gigabit Ethernet combo
Performance
Capacity in millions of packets per second (mpps) (64-byte packets) 14.88 Mpps
Switching capacity in gigabits per second (Gbps) 20 Gbps
Layer 2 switching
Spanning Tree Protocol (STP) Standard 802.1d spanning tree support
Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default
Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported
Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported
Rapid PVST+ (RPVST+); 126 instances are supported
Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP)
●  Up to 4 groups
●  Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad Link Aggregation Group (LAG)
VLAN Support for up to 255 active VLANs simultaneously
Port-based and 802.1Q tag-based VLANs
Management VLAN
Guest VLAN
Auto Surveillance VLAN (ASV)
Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices
Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping Limits bandwidth-intensive multicast traffic to only the requesters; supports 255 multicast groups (source-specific multicasting is also supported)
IGMP querier Used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router
Layer 3 routing
IPv4 routing

Wire-speed routing of IPv4 packets
Up to 32 static routes and up to 16 IP interfaces

IPv6 routing Wire-speed routing of IPv6 packets
Layer 3 interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface
Classless Interdomain Routing (CIDR) Support for CIDR
Dynamic Host Configuration Protocol (DHCP) relay at Layer 3 Relay of DHCP traffic across IP domains
User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BootP)/DHCP packets
Security
Secure Sockets Layer (SSL) Encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch
SSH Protocol SSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are supported.
IEEE 802.1X (authenticator role) RADIUS authentication, guest VLAN, single/multiple host mode, and single/multiple sessions
STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops)
Secure Core Technology (SCT) Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received
Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices and a secure auto-configuration. Access to view the sensitive data as plain text or encrypted is provided according to the user-configured access level and the access method of the user
Trustworthy systems

Trustworthy systems provide a highly secure foundation for Cisco products
Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC])

Port security Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses
RADIUS Supports RADIUS authentication for management access. Switch functions as a client
Storm control Broadcast, multicast, and unknown unicast
DoS prevention DoS attack prevention
Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels
ACLs Support for up to 512 rules
Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides
Time-based ACLs supported
Quality of service
Priority levels 8 hardware queues
Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and Class of Service (802.1p/CoS)
Class of service Port based, 802.1p VLAN priority based, IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based, Differentiated Services (DiffServ), classification and re-marking ACLs, trusted QoS
Rate limiting Ingress policer, egress shaping and rate control per VLAN, per port, and flow based
Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization
Standards
IPv6 IPv6 host mode
IPv6 over Ethernet
Dual IPv6/IPv4 stack
IPv6 Neighbor Discovery (ND)
IPv6 stateless address auto-configuration
Path Maximum Transmission Unit (MTU) discovery
Duplicate Address Detection (DAD)
ICMP version 6
IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support
USGv6 and IPv6 Gold Logo certified
IPv6 QoS Prioritizes IPv6 packets in hardware
IPv6 ACL Drop or rate-limit IPv6 packets in hardware
Multicast Listener Discovery (MLD v1/2) snooping Delivers IPv6 multicast packets only to the required receivers
IPv6 applications Web/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), RADIUS, Syslog, DNS client, DHCP client, DHCP auto-configuration
Management
Cisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard probe onsite
Cisco Business mobile app Mobile app for Cisco Business switch and wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips.
Cisco Network Plug and Play (PnP) agent

The Cisco Network PnP solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience.

Supports Cisco PnP Connect

Web user interface

Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, wizards, system dashboard, system maintenance, and monitoring. Basic and advanced mode for maximum operational efficiency

SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-Based Security Model (USM)
Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis
IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration
Firmware upgrade

Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH
Dual images for resilient firmware upgrades

Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port
VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port
DHCP (options 12, 59, 60, 66, 67, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration and image file download), DHCP relay, and hostname
Secure Copy (SCP) Securely transfers files to and from the switch
Auto-configuration with SCP file download Enables mass deployment with protection of sensitive data
Text-editable configurations Configuration files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment
Smartports Simplified configuration of QoS and security capabilities
Auto Smartports Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments
Text view CLI Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI
Localization Localization of GUI and documentation into multiple languages
Login banner Configurable multiple banners for web as well as CLI
Other management Traceroute, single IP management, HTTP/HTTPS, RADIUS, port mirroring, TFTP upgrade, DHCP client, SNTP, cable diagnostics, Ping, syslog, Telnet client (SSH secure support), automatic time settings from management station
Green (power efficiency) Automatically turns power off on an RJ-45 port when the detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up
Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables
EEE compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports
Disable port LEDs LEDs can be manually turned off to save energy
Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up)
Time-based PoE PoE power can be on or off based on user-defined schedule to save energy
Perpetual PoE Provides PoE power to connected powered devices while the device is rebooting
General
Jumbo frames Frame sizes up to 9000 bytes. The default MTU is 2000 bytes
MAC table 8000 addresses
Dying gasp Upon power loss/failure the switch can withstand >= 16 ms on detecting a 12V input drop
Chip guard Detects tampering attempts and responds during boot-up
Boot integrity Boot integrity visibility allows Cisco's platform identity and software integrity information to be visible and actionable
Discovery
Bonjour The switch advertises itself using the Bonjour protocol
Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-Media Endpoint Discovery (MED) extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones
Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol
Hardware
Power consumption (worst case)
Power dedicated to PoE 67W
System power consumption 110V=13.84W
220V=14.31W 
Power consumption (with PoE) 110V=80.79W
220V=80.86W
Heat dissipation (BTU/hr) 275.91
Ports
RJ-45 ports 8x 10/100/1000Mbps ports
2x 1Gigabit copper/SFP combo ports
Console port Cisco Standard RJ-45 console and USB Type C port
Buttons Reset button
Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T
LEDs System, Link/Act, PoE, Speed
Flash 512 MB
CPU Dual-core ARM at 1.4 GHz
DRAM 1 GB DDR4
Packet buffer 1.5 MB
Environmental
Unit dimensions (W x D x H) 268 x 185 x 44 mm (10.56 x 7.28 x 1.73 in)
Unit weight 1.53 kg (3.37 lb)
Power 100 to 240V 50 to 60 Hz
Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A
Operating temperature 23° to 122°F (-5° to 50°C) for other models
Storage temperature -13° to 158°F (-25° to 70°C)
Operating humidity 10% to 90%, relative, noncondensing
Storage humidity 10% to 90%, relative, noncondensing
Fan (number) Fanless
MTBF at 25°C (hours) 1,706,649

 

Xem thêm thông số kỹ thuật