Giá khuyến mại: | 12.100.000 đ |
Bảo hành: | 1 năm chính hãng Made In Taiwan |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
Planet SGS-6341-24T4X, Core Switch Layer 3 24-Port 10/100/1000T + 4-Port 10G SFP+ Stackable Managed Switch
- 24 Port 10/100/1000 Mbps, 4 Port 10G SFP.
- Switch Throughput: 95.23Mpps.
- Switch Fabric: 128Gbps/non-blocking.
- MAC Address: 16K MAC address table, automatic source address learning and aging.
- JUMBO Frame (FE, GE): 9K.
- Number of VLANs: Up to 256 VLANs groups, out of 4041 VLAN IDs.
- IPv6 Support.
Powerful Layer 3 Routing Solution for Enterprise and Data Center Networking
PLANET SGS-6341-24T4X is a Layer 3 Stackable Managed Gigabit Switch that provides high-density performance, Layer 3 static routing, RIP (Routing Information Protocol) and OSPF (Open Shortest Path First). With 128Gbps switching fabric and 4 10Gbps uplink ports, the SGS-6341-24T4X can handle extremely large amounts of data in a secure topology linking to an enterprise backbone or high capacity servers. The powerful WRR (Weighted Round Robin) and Network Security features make the SGS-6341-24T4X perform effective data traffic control for ISP and enterprise VoIP, video streaming, and multicast applications.
High Performance 10Gbps Ethernet Capacity
The four SFP+ slots built in the SGS-6341-24T4X boasts a high-performance switch architecture that is capable of providing non-blocking switch fabric and wire-speed throughput as high as 128Gbps, which greatly simplifies the tasks of upgrading the LAN for catering to increasing bandwidth demands. Each of the SFP+ slots supports Dual-Speed, 10GBASE-SR/LR or 1000BASE-SX/LX, meaning the administrator now can flexibly choose the suitable SFP/SFP+ transceiver according to the transmission distance or the transmission speed required to extend the network efficiently.
IP Stacking Management
The SGS-6341-24T4X supports IP stacking function that helps network managers to easily configure up to 24 switches in the same series via one single IP address instead of connecting and setting each unit one by one. The IP Stacking technology groups PLANET SGS-6341 switch series together to enable centralized management through a single unit, regardless of physical location or switch type, as long as they are connected to the same local network.
Layer 3 Routing Support
The SGS-6341-24T4X enables the administrator to conveniently boost network efficiency by configuring Layer 3 static routing manually, and the RIP or OSPF settings automatically. The RIP can employ the hop count as a routing metric and prevent routing loops by implementing a limit on the number of hops allowed in a path from the source to a destination. The OSPF is an interior dynamic routing protocol for autonomous system based on link state. The protocol creates a database for link state by exchanging link states among Layer3 switches, and then uses the Shortest Path First algorithm to generate a route table based on that database.
Full IPv6 Support
The SGS-6341-24T4X provides IPv6 management and enterprise-level secure features such as SSH, ACL, WRR and RADIUS authentication. It thus helps the enterprises to step in the IPv6 era with the lowest investment. In addition, you don’t need to replace the network facilities when the IPv6 FTTx edge network is built.
Robust Layer 2 Features
The SGS-6341-24T4X can be programmed for basic switch management functions such as port speed configuration, port aggregation, VLAN, Multiple Spanning Tree Protocol, WRR, bandwidth control and IGMP snooping. This switch provides 802.1Q tagged VLAN, Q-in-Q, voice VLAN and GVRP Protocol functions. By supporting port aggregation, the SGS-6341-24T4X allows the operation of a high-speed trunk combined with multiple ports. It enables up to 16 groups for trunking with a maximum of 8 ports for each group.
Intelligent SFP Diagnosis Mechanism
The SGS-6341-24T4X supports SFP-DDM (Digital Diagnostic Monitor) function that greatly helps network administrator to easily monitor real-time parameters of the SFP and SFP+ transceivers, such as optical output power, optical input power, temperature, laser bias current, and transceiver supply voltage.
Technical specifications
HARDWARE SPECIFICATIONS |
|
Hardware Version
|
2
|
Copper Ports
|
24 10/100/1000BASE-T RJ45 auto-MDI/MDI-X ports
|
SFP+ Slots
|
4 10GBASE-SR/LR SFP+ interface (port-25 to port-28)
|
Console
|
1 x RJ45-to-RS232 serial port (115200, 8, N, 1)
|
Switch Architecture
|
Store-and-forward
|
Switch Fabric
|
128Gbps/non-blocking
|
Switch Throughput
|
95.23Mpps
|
Address Table
|
16K MAC address table with auto learning function
|
Shared Data Buffer
|
1.5MB
|
Flow Control
|
Back pressure for half-duplex
|
Jumbo Frame
|
10KB
|
LED
|
System:
|
Dimensions (W x D x H)
|
440 x 240 x 43.6 mm, 1U height
|
Weight
|
3170g
|
Power Consumption
|
26 watts/88.66 BTU
|
Power Requirements
|
AC 100~240V, 50/60Hz
|
MANAGEMENT FUNCTION |
|
System Configuration
|
Console, Telnet, SSH, Web browser, SNMP v1, v2c and v3
|
Management |
Supports both IPv4 and IPv6 addressing
|
LAYER 3 FUNCTION |
|
Routing Protocol
|
Static routing, RIP, OSPF, BGP and PBR
|
Routing Table
|
Total 1K entries (IPv4/IPv6 shared)
|
LAYER 2 FUNCTION |
|
Port Configuration
|
Port disable/enable
|
Port Status
|
Display each port’s speed duplex mode, link status, flow control status and auto negotiation status
|
VLAN
|
802.1Q tagged based VLAN, up to 256 VLAN groups
|
Bandwidth Control
|
TX/RX/Both
|
Link Aggregation
|
IEEE 802.3ad LACP/static trunk
|
QoS
|
8 priority queues on all switch ports
|
Multicast
|
IGMP v1/v2/v3 snooping
|
Access Control List
|
Supports Standard and Expanded ACL
|
Security
|
Supports MAC + port binding
|
Authentication
|
IEEE 802.1x port-based network access control
|
SNMP MIBs
|
RFC 1213 MIB-II |
STANDARD CONFORMANCE |
|
Regulatory Compliance
|
FCC Part 15 Class A, CE
|
Standards Compliance
|
IEEE 802.3 10BASE-T
|
ENVIRONMENT |
|
Operating
|
Temperature: 0 ~ 50 degrees C
|
Storage
|
Temperature: -10 ~ 70 degrees C
|
ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
Loại Switch |
|
Số cổng mạng |
|