Bộ phát WiFi Aruba IAP-335 (AP-335)

banner

DANH MỤC SẢN PHẨM

Bộ phát WiFi Aruba IAP-335 (AP-335)

Bộ phát WiFi Aruba IAP-335 (AP-335)

Mã SP: IAP335

Lượt xem: 21 lượt

0 đánh giá

WiFi băng tần kép Chuẩn AC - Tốc độ: 2333Mbps
Băng tần 2.4Ghz: 600Mbps - MIMO 4x4
Băng tần 5Ghz: 1733Mbps - MIMO 4x4
(1) Cổng 2.5GbE và (1) Cổng 1GbE
Kết nối tối đa 256 User trên mỗi băng tần.
Cấp nguồn bằng: PoE 802.3at hoặc DC 48V-0.75A
Giá khuyến mại: 3.980.000 đ
Bảo hành: 24 tháng

KHUYẾN MÃI

Giá chưa VAT

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Tính năng nổi bật của Bộ phát Aruba IAP-335 (AP-335)

Aruba IAP-335 (AP-335) là bộ phát wifi chuyên dụng, chuẩn ac wave2, với cổng Uplink Multi-Gigabit, tốc độ tối đa 2333Mbps.

- Anten 2.4Ghz bao gồm: 4 anten đa hướng 4.3dBi

Anten 5Ghz bao gồm: 8 anten thông minh, với 4 anten dọc (5.4 dBi) và 4 anten ngang (4.2 dBi).

- Hoạt động ở 2 băng tần 2.4Ghz và 5Ghz 802.11 n/g/b/a/ac/ac Wave2 

- Tốc độ lên tới 2333Mbps (600Mbps trên băng tần 2.4GHz và 1733Mbps trên băng tần 5Ghz) 

- 1 cổng LAN 2.5GbE và 1 cổng LAN 1GbE.

- Hỗ trợ nhiều tùy chọn cấp nguồn: PoE chuẩn 802.3af/at hoặc DC 48V-0.75A.

Hỗ trợ 512 thiết bị truy cập đồng thời (256 trên mỗi băng tần). Và có thể thiết lập tối đa 16 SSID

- Nhiều tùy chọn cài đặt: Aruba Instant mode (Master - Slave) hoặc Controller-managed mode

- Đóng gói KHÔNG bao gồm Đế gắn tường và Nguồn.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

 Download Datasheet Aruba AP-335 

Model

Wireless Access Point Aruba AP-335

Operating Mode

 • Controller-managed mode – When managed by Aruba Mobility Controllers, Aruba 330 Series APs offer centralized configuration, data encryption, policy enforcement and network services, as well as distributed and centralized traffic forwarding.
 • Aruba Instant mode – In Aruba Instant mode, a single AP automatically distributes the network configuration to other Instant APs in the WLAN. Simply power-up one
 • Secure enterprise mesh

WI-FI Radio Specifications

 • AP type: Indoor, dual radio, 5 GHz 802.11ac 4x4 MIMO and 2.4 GHz 802.11n 4x4 MIMO
 • Software-configurable dual radio supports 5 GHz (Radio 0) and 2.4 GHz (Radio 1)   • 5 GHz: ­
   - Four spatial stream Single User (SU) MIMO for up to 1,733 Mbps wireless data rate to individual 4x4 VHT80 or 2x2 VHT160 client devices ­
   - Four spatial stream Multi User (MU) MIMO for up to 1,733 Mbps wireless data rate to up to three MU-MIMO capable client devices simultaneously
 • 2.4 GHz: Four spatial stream Single User (SU) MIMO for up to 600 Mbps wireless data rate to individual 4x4 HT40 client devices
 • Support for up to 255 associated client devices per radio, and up to 16 BSSIDs per radio
 • Available channels: Dependent on configured regulatory domain
 • Dynamic frequency selection (DFS) optimizes the use of available RF spectrum
 • Supported radio technologies: ­
   - 802.11b: Direct-sequence spread-spectrum (DSSS) ­
   - 802.11a/g/n/ac: Orthogonal frequency-division multiplexing (OFDM)
 • Transmit power: Configurable in increments of 0.5 dBm
 • Maximum (aggregate, conducted total) transmit power (limited by local regulatory requirements): ­
   - 2.4 GHz band: +24 dBm (18 dBm per chain) ­
   - 5 GHz band: +24 dBm (18 dBm per chain)
     Notes: Conducted transmit power levels exclude antenna gain. For total (EIRP) transmit power, add antenna gain.
 • Advanced Cellular Coexistence (ACC) minimizes interference from cellular networks
 • Maximum ratio combining (MRC) for improved receiver performance
 • Cyclic delay/shift diversity (CDD/CSD) for improved downlink RF performance
 • Short guard interval for 20 MHz, 40 MHz, 80 MHz and 160 MHz channels
 • Space-time block coding (STBC) for increased range and improved reception
 • Low-density parity check (LDPC) for high-efficiency error correction and increased throughput
 • Transmit beam-forming (TxBF) for increased signal reliability and range
 • Supported data rates (Mbps):
   -­ 802.11b: 1, 2, 5.5, 11 ­
   - 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54 ­
   - 802.11n: 6.5 to 600 (MCS0 to MCS31) ­
   - 802.11ac: 6.5 to 1,733 (MCS0 to MCS9, NSS = 1 to 4 for VHT20/40/80, NSS = 1 to 2 for VHT160)
 • 802.11n high-throughput (HT) support: HT 20/40
 • 802.11ac very high throughput (VHT) support: VHT 20/40/80/160
 • 802.11n/ac packet aggregation: A-MPDU, A-MSDU

Antennas

­ • Four integrated 2.4 GHz downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 4.3 dBi per antenna. ­
 • Each 5 GHz radio chain has both a vertically and a horizontally polarized antenna element; AP software automatically and dynamically selects the best set of elements for each data packet transmitted or received. ­
 • Eight integrated 5 GHz downtilt omni-directional antennas for 4x4 MIMO with maximum antenna gain of 5.4 dBi (vertical)/4.2 dBi (horizontal) per antenna. ­
 • Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. ­
 • The maximum gain of the combined (summed) antenna patterns for all elements operating in the same band is 8.6 dBi in 2.4 GHz and 8.5 dBi (vertical)/8.1 dBi (horizontal) in 5 GHz

Other Interfaces

 • One HPE Smart Rate port (RJ-45, maximum negotiated speed 2.5 Gbps) ­ Auto-sensing link speed (100/1000/2500BASE-T) and MDI/MDX ­ 2.5Gbps and 5Gbps speeds comply with NBase-T and 802.3bz specifications ­ PoE-PD: 48 Vdc (nominal) 802.3at PoE
 • One 10/100/1000BASE-T Ethernet network interface (RJ-45) ­ Auto-sensing link speed and MDI/MDX ­ PoE-PD: 48 Vdc (nominal) 802.3at PoE
 • DC power interface, accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
 • USB 2.0 host interface (Type A connector)
 • Bluetooth Low Energy (BLE) radio ­ Up to 4 dBm transmit power (class 2) and -91 dBm receive sensitivity ­ Integrated antenna with roughly 30 degrees downtilt and peak gain of 5.1 dBi (AP-334/IAP-334) or 2.2 dBi (AP335/IAP-335)
 • Visual indicators (tri-color LEDs): for System and Radio status
 • Reset button: factory reset (during device power up)
 • Serial console interface (RJ-45, RS232)
 • Kensington security slot

Power Sources and Consumption

 • The AP supports direct DC power and Power over Ethernet (PoE)
 • When both power sources are available, DC power takes priority over PoE
 • Power sources are sold separately
 • Direct DC source: 48Vdc nominal, +/- 5% -­ Interface accepts 1.35/3.5-mm center-positive circular plug with 9.5-mm length
 • Power over Ethernet (PoE): 48 Vdc (nominal) 802.3af/802.3at compliant source
   -­ When using IPM, the AP may enter power-save mode with reduced functionality when powered by a PoE source (see details on Intelligent Power Monitoring in this datasheet)
   -­ Without IPM the AP will apply some fixed restrictions when using PoE
   - The USB interface is disabled when using an 802.3at PoE power source ­
   - The USB interface and second Ethernet port are disabled, and both radios operate in 1x1 mode when using an 802.3af POE power source
 • Maximum (worst-case) power consumption: 25.3W (802.3at PoE), 13.2W (802.3af PoE) or 25W (DC) ­
   - Excludes power consumed by external USB device (and internal overhead); this could add up to 5.9W (PoE or DC) for a 5W/1A USB device
 • Maximum (worst-case) power consumption in idle mode: 10.9W (PoE or DC)

Environmental

 

 • Operating: ­
   - Temperature: 0° C to +50° C (+32° F to +122° F) ­
   - Humidity: 5% to 95% non-condensing
 • Storage and transportation: ­
   - Temperature: -40° C to +70° C (-40° F to +158° F)

Certifications

 • CB Scheme Safety, cTUVus
 • UL2043 plenum rating
 • Wi-Fi Alliance (WFA) certified 802.11a/b/g/n/ac

Mechanical

 • Dimensions/weight (unit, excluding mount accessories): ­
   - 225mm (W) x 224mm (D) x 52mm (H) 8.9” (W) x 8.9” (D) x 2.0” (H)
   -­ 1150g/41oz
 • Dimensions/weight (shipping): ­
   - 335mm (W) x 290mm (D) x 76mm (H) 13.2” (W) x 11.4” (D) x 3.0” (H)
   -­ 1550g/55oz

Xem thêm thông số kỹ thuật