| Giá khuyến mại: | Liên hệ |
| Bảo hành: | 12 tháng |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
Teltonika RUT206 là mẫu router 4G công nghiệp nhỏ gọn từ hãng Teltonika, được thiết kế dành riêng cho các môi trường khắc nghiệt nơi yêu cầu kết nối mạng ổn định và liên tục. Với khả năng hỗ trợ LTE Cat 4 tốc độ cao, dual SIM dự phòng cùng các giao tiếp serial đa dạng, sản phẩm mang đến giải pháp kết nối đáng tin cậy cho ứng dụng IoT và M2M. Đây là lựa chọn lý tưởng cho doanh nghiệp cần triển khai mạng di động ở khu vực xa xôi hoặc điều kiện vận hành khắc nghiệt.

- Kết nối 4G ổn định với dự phòng tự động: Hỗ trợ LTE Cat 4 tốc độ tải xuống lên đến 150 Mbps, kèm dual SIM chuyển đổi thông minh khi mất tín hiệu, giúp duy trì kết nối liên tục mà không gián đoạn hoạt động.
- Giao tiếp serial linh hoạt cho thiết bị công nghiệp: Tích hợp RS232 và RS485, cho phép kết nối dễ dàng với các thiết bị cũ như máy CNC, PLC hoặc cảm biến, hỗ trợ giao thức công nghiệp như Modbus và DNP3.
- WiFi và Ethernet đa dạng: Cung cấp WiFi 802.11b/g/n làm điểm truy cập hoặc client, kết hợp 2 cổng Ethernet 10/100 Mbps (hỗ trợ PoE thụ động), tiện lợi cho việc mở rộng mạng nội bộ.
- Thiết kế công nghiệp siêu bền: Vỏ nhôm chắc chắn, hoạt động ổn định ở nhiệt độ từ -40°C đến 75°C, chống ẩm và bụi IP30, phù hợp môi trường nhà máy hoặc ngoài trời.
- Quản lý từ xa tiện lợi: Tích hợp hệ thống RMS của Teltonika, cho phép giám sát, cấu hình và cập nhật firmware từ xa, giảm chi phí bảo trì đáng kể.
- Bảo mật cao cấp: Hỗ trợ VPN đa giao thức, firewall mạnh mẽ và mã hóa WiFi hiện đại, đảm bảo dữ liệu truyền tải an toàn trong các ứng dụng nhạy cảm.
- Kết nối di động: 4G LTE Cat 4 (tốc độ tải xuống 150 Mbps, tải lên 50 Mbps), hỗ trợ fallback 3G/2G.
- Cổng kết nối: 2 cổng Ethernet 10/100 Mbps (1 WAN, 1 LAN hỗ trợ PoE thụ động).
- WiFi: Chuẩn 802.11b/g/n (2.4 GHz), chế độ Access Point hoặc Station, hỗ trợ lên đến 50 kết nối đồng thời.
- Giao tiếp serial: RS232 và RS485 trên khối terminal 6 chân.
- Nguồn điện: Đầu vào 9-57 VDC (bảo vệ ngược cực), hỗ trợ PoE thụ động, tiêu thụ tối đa 3.5 W.
- Môi trường hoạt động: Nhiệt độ -40°C đến 75°C, độ ẩm 10-90% không ngưng tụ, cấp bảo vệ IP30.
- Kích thước và trọng lượng: 83 x 25 x 83 mm, trọng lượng 132 g.

- Trong nhà máy sản xuất và tự động hóa công nghiệp, RUT206 giúp kết nối thiết bị legacy qua serial với mạng đám mây, hỗ trợ giám sát máy móc từ xa mà không cần thay thế thiết bị cũ.
- Tại các khu vực nông thôn hoặc công trường xa xôi thiếu hạ tầng mạng cố định, router cung cấp kết nối 4G ổn định cho camera giám sát, cảm biến môi trường hoặc hệ thống IoT, đảm bảo dữ liệu truyền về trung tâm liên tục.
- Với doanh nghiệp vận hành máy bán hàng tự động hoặc biển quảng cáo kỹ thuật số, sản phẩm mang lại mạng WiFi và 4G đáng tin cậy, kèm quản lý từ xa để cập nhật nội dung nhanh chóng.
Với thiết kế bền bỉ, tính năng phong phú và thông số kỹ thuật vượt trội, Teltonika RUT206 chính là giải pháp kết nối mạng công nghiệp mà mọi doanh nghiệp hiện đại đều cần để vận hành hiệu quả và không lo gián đoạn.
ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
| Thông số | Chi tiết |
|---|---|
| Mobile module | 4G LTE Cat 4 up to 150 DL/50 UL Mbps; 3G up to 21 DL/5.76 UL Mbps; 2G up to 236.8 DL/236.8 UL kbps |
| 3GPP Release | Release 9 |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection |
| Status | IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC |
| SMS | SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Block/Allow list | Operator block/allow list (by country or separate operators) |
| Band management | Band lock, Used band status display |
| SIM idle protection service | Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked |
| SIM PIN code management | SIM PIN code management enables setting, changing, or disabling the SIM card's PIN |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| Wireless mode | 802.11b/g/n (Wi-Fi 4), Access Point (AP), Station (STA) |
| Wi-Fi security | WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF) |
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
| Wi-Fi users | Up to 50 simultaneous connections |
| Wireless Connectivity Features | Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k) |
| Wireless MAC filter | Allowlist, blocklist |
| Wireless QR code generator | Once scanned, a user will automatically enter your network without needing to input login information |
| TravelMate | Forward Wi-Fi hotspot landing page to a subsequent connected device |
| WAN | 1 x WAN port 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| LAN | 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake on Lan (WOL), VXLAN |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customisation |
| Firewall status page | View all your Firewall statistics, rules, and rule counters |
| Port management | View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on |
| Network topology | Visual representation of your network, showing which devices are connected to which other devices |
| DHCP | Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards |
| QoS / SQM | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supported >77 service providers, others can be configured manually |
| DNS over HTTPS | DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS |
| Network backup | Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| Hotspot | Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes |
| Hotspot 2.0 | Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Port and tag-based VLAN separation |
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number |
| WEB filter | Block list for blocking out unwanted websites, allow list for specifying allowed sites only |
| Access control | Flexible access control of SSH, Web interface, CLI and Telnet |
| Certificate Manager | Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates |
| 802.1x | Port-based network access control server |
| OpenVPN | Multiple clients and a server can run simultaneously, 27 encryption methods |
| IPsec | XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec |
| GRE | GRE tunnel, GRE tunnel over IPsec support |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN | Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| Tinc | Tinc offers encryption, authentication and compression in it's tunnels. Client and server support. |
| CPU | Mediatek, 580 MHz, MIPS 24KEc |
| RAM | 128 MB, DDR2 |
| FLASH storage | 32 MB, NOR Flash |
| Power consumption | Idle: < 2 W, Max: < 3.5 W |
| Dimensions (W x H x D) | 83 x 25 x 83 mm |
| Weight | 132 g |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
| Regulatory | CE, UKCA, CB, RCM, EAC, UCRF |
Phụ kiện