Router WiFi 4G Công nghiệp Teltonika RUTX11

banner

DANH MỤC SẢN PHẨM

Router WiFi  4G Công nghiệp Teltonika RUTX11

Router WiFi 4G Công nghiệp Teltonika RUTX11

Mã SP: RUTX11

Lượt xem: 58 lượt

0 đánh giá

Hỗ trợ 4G LTE CAT 6 cho tốc độ 300Mbps DL / 50Mbps UL
WiFi 5 dual-band & BLE
(2) khe SIM, tự động Backup
(4) GE, 1 WAN & 3 LAN
Cấp nguồn 4-pin DC adapter 9 - 50 VDC
Chống chịu chuẩn IP30
Giá khuyến mại: Liên hệ
Bảo hành: 12 tháng

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh Sỉ/Lẻ
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Teltonika RUTX11: Router 4G Gigabit WiFi AC Công Nghiệp

Teltonika RUTX11 là router di động công nghiệp cao cấp nhất từ hãng Teltonika, mang đến kết nối LTE Cat 6 tốc độ cao lên đến 300 Mbps cùng WiFi dual band hiện đại và Bluetooth LE. Với bốn cổng Gigabit Ethernet, dual SIM dự phòng tự động và chứng nhận EN 45545-2 cho ứng dụng trên tàu hỏa, sản phẩm lý tưởng cho các dự án chuyên nghiệp đòi hỏi băng thông lớn và độ tin cậy cao. Đây là giải pháp kết nối toàn diện cho IoT công nghiệp trong môi trường đòi hỏi khắt khe.

Tính năng nổi bật của sản phẩm

- Kết nối 4G tốc độ cao với carrier aggregation: Hỗ trợ LTE Cat 6 đạt tải xuống 300 Mbps, kết hợp nhiều băng tần để tối ưu băng thông, phù hợp truyền dữ liệu lớn như video hoặc đám mây mà không gián đoạn.
- WiFi dual band Wave-2 802.11ac mạnh mẽ: Cung cấp mạng không dây tốc độ cao trên cả 2.4 GHz và 5 GHz, hỗ trợ MU-MIMO cho nhiều thiết bị kết nối đồng thời, biến router thành hotspot di động đáng tin cậy.
- Bluetooth LE tích hợp: Cho phép kết nối không dây với cảm biến, beacon hoặc thiết bị IoT gần, mở rộng khả năng thu thập dữ liệu trong các hệ thống thông minh.
- Dual SIM dự phòng thông minh: Hai khe SIM với chuyển đổi tự động dựa trên tín hiệu, dữ liệu hoặc WAN backup, đảm bảo mạng luôn hoạt động liên tục ngay cả khi một nhà mạng gặp sự cố.
- Mạng Ethernet Gigabit đa cổng: Bốn cổng 10/100/1000 Mbps hỗ trợ VLAN nâng cao, giúp xây dựng mạng nội bộ tốc độ cao cho văn phòng di động hoặc hệ thống giám sát.
- Thiết kế công nghiệp và định vị GNSS: Vỏ nhôm bền bỉ, hoạt động ổn định ở môi trường khắc nghiệt, kèm định vị đa hệ thống chính xác cho ứng dụng theo dõi tài sản.

Thông số kỹ thuật

- Kết nối di động: 4G LTE Cat 6 (tốc độ tải xuống 300 Mbps, tải lên 50 Mbps), hỗ trợ carrier aggregation và fallback 3G.
- Cổng kết nối: 4 cổng Gigabit Ethernet (hỗ trợ cấu hình WAN/LAN linh hoạt).
- WiFi: Chuẩn Wave-2 802.11ac dual band (2.4 GHz và 5 GHz), hỗ trợ MU-MIMO.
- Bluetooth: Bluetooth Low Energy (LE).
- SIM: 2 khe Mini SIM với auto failover.
- Nguồn điện: Đầu vào 9-50 VDC, tiêu thụ trung bình thấp cho ứng dụng di động.
- Môi trường hoạt động: Nhiệt độ -40°C đến 75°C, vỏ nhôm chắc chắn với chứng nhận công nghiệp.

Ứng dụng trong các tình huống thực tế

- Trong lĩnh vực giao thông vận tải như xe buýt hoặc tàu hỏa, RUTX11 cung cấp kết nối ổn định cho hệ thống giám sát hành khách, truyền video thời gian thực và định vị xe nhờ chứng nhận chuyên dụng và GNSS.
- Tại các dự án giám sát camera CCTV hoặc IoT công nghiệp, router mang lại băng thông cao qua 4G và WiFi để truyền hình ảnh chất lượng cao từ xa, kết hợp Bluetooth cho cảm biến bổ sung.
- Với doanh nghiệp cần hotspot di động tại công trường hoặc sự kiện ngoài trời, sản phẩm đảm bảo mạng Gigabit có dây và không dây mạnh mẽ, dual SIM dự phòng để tránh mất kết nối.

Với hiệu suất vượt trội từ kết nối LTE Cat 6, WiFi dual band và thiết kế công nghiệp bền bỉ, Teltonika RUTX11 chính là lựa chọn tối ưu cho mọi hệ thống mạng chuyên nghiệp mà doanh nghiệp Việt Nam đang tìm kiếm.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

Download Datasheets

Thông sốChi tiết
Mobile module 4G LTE Cat 6 up to 300 DL/50 UL Mbps; 3G up to 42 DL/5.76 UL Mbps
3GPP Release Release 12
eSIM Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
*Feature availability varies by order code
SIM switch Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
*Feature availability varies by order code
Status IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list Operator block/allow list (by country or separate operators)
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
SIM idle protection service Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked
SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Wireless mode 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID SSID stealth mode and access control based on MAC address
Wi-Fi users Up to 150 simultaneous connections
Wireless Connectivity Features Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter Allowlist, blocklist
Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
TravelMate Forward Wi-Fi hotspot landing page to a subsequent connected device
Bluetooth Bluetooth 4.0
Bluetooth low energy (LE) for short range communication
WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 3 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules, TTL target customisation
Firewall status page View all your Firewall statistics, rules, and rule counters
Port management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology Visual representation of your network, showing which devices are connected to which other devices
Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes
DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / SQM Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >77 service providers, others can be configured manually
DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS Possibility to mount remote file system via SSH protocol
VRF support Initial virtual routing and forwarding (VRF) support
802.1x Port-based network access control client
Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation
Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter Block list for blocking out unwanted websites, allow list for specifying allowed sites only
Access control Flexible access control of SSH, Web interface, CLI and Telnet
TPM Identification and authentication module, TPM 2.0 standard
*Feature availability varies by order code
Certificate Manager Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec
GRE GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTP SSTP client instance support
ZeroTier ZeroTier VPN client support
WireGuard WireGuard VPN client and server support
Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
Tailscale Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA Supported modes: Client, Server
Supported connection types: TCP
MQTT Gateway Modbus MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
MODBUS Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII
Data to Server Protocol: HTTP(S), MQTT, Azure MQTT
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting
DNP3 Supported modes: Station, Outstation
Supported connection: TCP, USB
DLMS/COSEM DLMS Support: DLMS - standard protocol for utility meter data exchange
Supported modes: Client
Supported connection types: TCP, USB
CPU Quad-core ARM Cortex A7, 717 MHz
RAM 256 MB, DDR3
FLASH storage 256 MB, SPI Flash
Power consumption 16 W Max
Dimensions (W x H x D) 115 x 44.2 x 95.1 mm
Weight 456 g
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30

Phụ kiện chính

  • 4 x RJ45 ports (1 WAN + 3 LAN Gigabit)
  • 2 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x RP-SMA for Bluetooth, 1 x SMA for GNSS
  • USB A port
  • DIN rail/wall mount kit (tùy chọn)

 

Xem thêm thông số kỹ thuật