Enterprise Rackmount Router WiFi 4G Công Nghiệp Teltonika RUTXR1

banner

DANH MỤC SẢN PHẨM

Enterprise Rackmount Router WiFi 4G Công Nghiệp Teltonika RUTXR1

Enterprise Rackmount Router WiFi 4G Công Nghiệp Teltonika RUTXR1

Mã SP: RUTXR1

Lượt xem: 35 lượt

0 đánh giá

Hỗ trợ 3G/4G LTE CAT 6 cho tốc độ 300Mbps DL / 50Mbps UL
WiFi 5 dual-band
(2) SMA antenna LTE, (2) RP-SMA antenna WiFi
(2) SIM, tự động backup
(1) Combo GE/SFP WAN port & (4) GE LAN
(2) nguồn 4-pin power connector 9 - 50 VDC
Chống chịu IP30
Giá khuyến mại: Liên hệ
Bảo hành: 12 tháng

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh Sỉ/Lẻ
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Teltonika RUTXR1: Router LTE Cat 6 Rack-Mount Doanh Nghiệp

Teltonika RUTXR1 là router di động công nghiệp dạng rack-mount đầu tiên trong dòng sản phẩm của Teltonika, được thiết kế dành riêng cho môi trường doanh nghiệp đòi hỏi kết nối liên tục và linh hoạt. Với hỗ trợ LTE Cat 6 tốc độ cao, cổng SFP quang, nguồn điện dự phòng kép cùng dual-SIM thông minh, sản phẩm mang đến giải pháp kết nối đáng tin cậy cho các hệ thống IoT và mạng chuyên nghiệp. Đây là lựa chọn phù hợp cho các tủ rack server nơi cần tích hợp cellular, fiber và Ethernet một cách liền mạch.

Tính năng nổi bật của sản phẩm

- Kết nối 4G tốc độ cao với carrier aggregation: Hỗ trợ LTE Cat 6 đạt tải xuống 300 Mbps, tận dụng kết hợp nhiều băng tần để tối ưu băng thông, lý tưởng cho truyền dữ liệu lớn hoặc ứng dụng thời gian thực.
- Dual-SIM dự phòng tự động: Hai khe SIM mini bên ngoài với cơ chế chuyển đổi thông minh dựa trên tín hiệu yếu, giới hạn dữ liệu hoặc mất mạng, đảm bảo kết nối không gián đoạn mà không cần can thiệp thủ công.
- Cổng SFP cho kết nối quang tốc độ cao: Tích hợp cổng SFP thay thế cho WAN Ethernet, hỗ trợ kết nối fiber-optic dài hạn, phù hợp mở rộng mạng doanh nghiệp mà không lo suy hao tín hiệu.
- WiFi dual-band hiện đại: Chuẩn 802.11ac Wave-2 với MU-MIMO, hoạt động trên cả 2.4 GHz và 5 GHz, cho phép nhiều thiết bị kết nối đồng thời mà vẫn duy trì tốc độ ổn định.
- Nguồn điện dự phòng kép: Hai đầu vào nguồn DC độc lập với bảo vệ ngược cực và chống surge, giúp router hoạt động liên tục ngay cả khi một nguồn gặp sự cố.
- Thiết kế rack-mount bền bỉ: Vỏ kim loại chắc chắn, dễ lắp đặt vào tủ rack 19 inch, kèm console RS232 và USB để quản lý thiết bị ngoại vi.

Thông số kỹ thuật

- Kết nối di động: 4G LTE Cat 6 (tốc độ tải xuống 300 Mbps), hỗ trợ carrier aggregation và fallback 3G.
- Cổng kết nối: 5 cổng Gigabit Ethernet (1 WAN, 4 LAN), 1 cổng SFP (không đồng thời với WAN GE).
- WiFi: Chuẩn 802.11ac Wave-2 dual-band MU-MIMO, hỗ trợ lên đến 150 kết nối đồng thời.
- SIM: 2 khe Mini SIM bên ngoài với auto failover.
- Bộ xử lý và bộ nhớ: CPU Quad-core ARM Cortex A7 717 MHz, 256 MB RAM DDR3, 256 MB Flash SPI.
- Nguồn điện: Đầu vào kép 9-50 VDC, tiêu thụ tối đa 18 W.
- Kích thước và trọng lượng: 272 x 42.6 x 122.6 mm, trọng lượng 1050 g.
- Môi trường hoạt động: Nhiệt độ -40°C đến 75°C, độ ẩm 10-90% không ngưng tụ.

Ứng dụng trong các tình huống thực tế

- Trong data center hoặc tủ rack doanh nghiệp, RUTXR1 cung cấp kết nối dự phòng qua 4G và SFP quang, kết hợp nguồn kép để duy trì dịch vụ mạng chính mà không lo downtime khi WAN chính gặp sự cố.
- Tại các hệ thống IoT công nghiệp hoặc giám sát từ xa, router hỗ trợ truyền dữ liệu lớn qua cellular tốc độ cao, WiFi nội bộ và console để kết nối thiết bị legacy, đảm bảo vận hành ổn định ở môi trường khắc nghiệt.
- Với văn phòng vừa hoặc chi nhánh xa xôi, sản phẩm mang lại mạng Gigabit có dây, WiFi dual-band và dual-SIM để chuyển đổi nhà mạng nhanh chóng, hỗ trợ hotspot di động đáng tin cậy.

Với hiệu suất mạnh mẽ từ LTE Cat 6, thiết kế rack-mount chuyên nghiệp cùng các tính năng dự phòng toàn diện, Teltonika RUTXR1 chính là giải pháp kết nối doanh nghiệp mà mọi hệ thống mạng hiện đại tại Việt Nam đều nên sở hữu.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

Download Datasheets

Thông sốChi tiết
Mobile module 4G LTE Cat 6 up to 300 DL/50 UL Mbps; 3G up to 42 DL/5.76 UL Mbps
3GPP Release Release 11
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list Operator block/allow list (by country or separate operators)
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
SIM idle protection service Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked
SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Wireless mode 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID SSID stealth mode and access control based on MAC address
Wi-Fi users Up to 150 simultaneous connections
Wireless Connectivity Features Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter Allowlist, blocklist
Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
TravelMate Forward Wi-Fi hotspot landing page to a subsequent connected device
WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Fibre 1 x SFP port (cannot work simultaneously with Ethernet WAN port)
LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules, TTL target customisation
Firewall status page View all your Firewall statistics, rules, and rule counters
Port management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology Visual representation of your network, showing which devices are connected to which other devices
Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes
DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / SQM Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >77 service providers, others can be configured manually
DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup Wi-Fi WAN, Mobile, Fiber, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS Possibility to mount remote file system via SSH protocol
VRF support Initial virtual routing and forwarding (VRF) support
802.1x Port-based network access control client
Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation
Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter Block list for blocking out unwanted websites, allow list for specifying allowed sites only
Access control Flexible access control of SSH, Web interface, CLI and Telnet
Certificate Manager Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec
GRE GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTP SSTP client instance support
ZeroTier ZeroTier VPN client support
WireGuard WireGuard VPN client and server support
Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
Tailscale Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA Supported modes: Client, Server
Supported connection types: TCP
MQTT Gateway Modbus MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
MODBUS Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII
Data to Server Protocol: HTTP(S), MQTT, Azure MQTT
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting
DNP3 Supported modes: Station, Outstation
Supported connection: TCP, USB
DLMS/COSEM DLMS Support: DLMS - standard protocol for utility meter data exchange
Supported modes: Client
Supported connection types: TCP, USB
CPU Quad-core ARM Cortex A7, 717 MHz
RAM 256 MB, DDR3
FLASH storage 256 MB, SPI Flash
Power consumption Idle: < 3W, max: 18W
Dimensions (W x H x D) 272 x 42.6 x 122.6 mm
Weight 1093 g
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing

Phụ kiện chính

  • 5 x RJ45 ports (1 WAN Gigabit + 4 LAN Gigabit)
  • 1 x SFP port
  • 2 x SMA for LTE
  • USB A port
  • Rack mounting kit
Xem thêm thông số kỹ thuật