| Giá khuyến mại: | Liên hệ |
| Bảo hành: | 12 tháng |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
Teltonika RUTC50 là router di động công nghiệp 5G hiện đại từ hãng Teltonika, được thiết kế dành riêng cho các ứng dụng edge computing và IoT đòi hỏi tốc độ cao cùng độ tin cậy vượt trội. Với kết nối 5G đạt tốc độ lên đến 3.4 Gbps, Wi-Fi 6 hỗ trợ multi-user MIMO và bộ nhớ lớn, sản phẩm mang đến giải pháp kết nối không dây mạnh mẽ cho môi trường khắc nghiệt. Đây là lựa chọn phù hợp cho doanh nghiệp cần triển khai mạng nhanh chóng, ổn định mà không phụ thuộc hạ tầng cố định.

- Kết nối 5G tốc độ cực cao: Hỗ trợ 5G Sub-6 GHz SA/NSA với tốc độ tải xuống lên đến 3.4 Gbps nhờ 4x4 MIMO, cùng fallback LTE Cat 20, đảm bảo truyền dữ liệu lớn như video hoặc ứng dụng thời gian thực mượt mà.
- Wi-Fi 6 dual band tiên tiến: Chuẩn 802.11ax với multi-user MIMO, hoạt động đồng thời trên 2.4 GHz và 5 GHz, hỗ trợ hàng trăm kết nối cùng lúc mà vẫn giữ tốc độ ổn định, lý tưởng làm hotspot di động.
- Dual SIM kèm eSIM toàn cầu: Hai khe Mini SIM bên ngoài kết hợp eSIM tùy chọn, chuyển đổi tự động thông minh và triển khai không cần chạm, giúp duy trì kết nối liên tục ở bất kỳ đâu trên thế giới.
- Mạng Ethernet Gigabit đa cổng: Năm cổng 10/100/1000 Mbps (1 WAN, 4 LAN), hỗ trợ cấu hình linh hoạt và VLAN, tiện lợi xây dựng mạng nội bộ tốc độ cao cho nhiều thiết bị.
- Hiệu suất edge computing mạnh mẽ: Bộ nhớ RAM 1GB và flash 8GB, kết hợp CPU mạnh, cho phép xử lý dữ liệu tại chỗ mà không cần gửi về đám mây, giảm độ trễ đáng kể.
- Thiết kế công nghiệp bền bỉ với GNSS: Vỏ nhôm chắc chắn, hoạt động ổn định ở nhiệt độ rộng, tích hợp định vị đa hệ thống và các cổng I/O kỹ thuật số, phù hợp môi trường ngoài trời hoặc di động.
- Kết nối di động: 5G Sub-6 GHz (tốc độ tải xuống tối đa 3.4 Gbps với 4x4 MIMO, tải lên 900 Mbps), fallback 4G LTE Cat 20 (2.0 Gbps DL).
- WiFi: Chuẩn 802.11ax (Wi-Fi 6) dual band, MU-MIMO, tốc độ lên đến 2402 Mbps (5 GHz) + 576 Mbps (2.4 GHz).
- Cổng kết nối: 5 cổng Gigabit Ethernet (1 WAN, 4 LAN).
- SIM: Dual Mini SIM kèm hỗ trợ eSIM.
- Định vị: Tích hợp GNSS với anten SMA riêng.
- Môi trường hoạt động: Nhiệt độ -40°C đến 75°C, vỏ nhôm IP30.
- Kích thước và trọng lượng: 130.4 x 42.6 x 103.4 mm, trọng lượng 452 g.
- Trong các sự kiện pop-up hoặc triển lãm tạm thời như auto show, RUTC50 cung cấp kết nối 5G và Wi-Fi 6 tốc độ cao cho hàng trăm thiết bị đồng thời, đảm bảo truyền hình ảnh và dữ liệu mượt mà mà không cần hạ tầng cố định.
- Tại môi trường công nghiệp hoặc edge computing như nhà máy thông minh, router hỗ trợ xử lý dữ liệu tại chỗ với bộ nhớ lớn, kết hợp GNSS cho theo dõi tài sản, giúp tối ưu hóa quy trình mà giảm độ trễ.
- Với các dự án IoT di động hoặc khu vực xa xôi, sản phẩm mang lại mạng ổn định qua dual SIM/eSIM và thiết kế bền bỉ, lý tưởng cho giám sát từ xa hoặc phương tiện vận tải.
Với tốc độ 5G vượt trội, Wi-Fi 6 hiện đại cùng thiết kế công nghiệp chuyên nghiệp, Teltonika RUTC50 chính là giải pháp kết nối không dây mà mọi doanh nghiệp Việt Nam cần để vận hành hiệu quả trong kỷ nguyên số.
ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
| Thông số | Chi tiết |
|---|---|
| Mobile module | 5G Sub-6 Ghz SA/NSA 2.4/3.4 Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2); 4G (LTE) – LTE Cat 19 1.6 Gbps DL, Cat 18 200 Mbps UL; 3G – 42 Mbps DL, 5.76 Mbps UL |
| 3GPP Release | Release 16 |
| eSIM | Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans Feature availability varies by order code (RUTC50 1**) |
| SIM switch | 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (RUTC50 0**) 2 SIM cards and 1 eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection (RUTC50 1*) |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, SIM provider, operator, network type, cell ID, LAC, TAC, ARFCN, UARFCN, EARFCN |
| SMS | SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Block/Allow list | Operator block/allow list (by country or separate operators) |
| Multiple PDN | Possibility to use different PDNs for multiple network access and services |
| Band management | Band lock, Used band status display |
| SIM idle protection service | Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked |
| SIM PIN code management | SIM PIN code management enables setting, changing, or disabling the SIM card's PIN |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Router assigns its mobile WAN IP address to another device on LAN |
| Framed routing | Framed routing: support an IP network behind 5G UE |
| Wireless mode | 802.11b/g/n/ac/ax (Wi-Fi 6) with data transmission rates up to 2402Mbps on 5GHz, 576Mbps on 2.4GHz (Dual Band, MU-MIMO) |
| Wi-Fi security | WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF) |
| SSID/ESSID | SSID stealth mode and access control based on MAC address |
| WiFi users | Up to 512 simultaneous connections |
| Wireless Connectivity Features | Wireless mesh (802.11s), fast roaming (802.11r), BSS transition management (802.11v), radio resource measurement (802.11k) |
| Wireless MAC filter | Allowlist, blocklist |
| Wireless QR code generator | Once scanned, a user will automatically enter your network without needing to input login information |
| TravelMate | Forward Wi-Fi hotspot landing page to a subsequent connected device |
| WAN | 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| LAN | 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover |
| Routing | Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN |
| VoIP passthrough support | H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customisation |
| Firewall status page | View all your Firewall statistics, rules, and rule counters |
| Port management | View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on |
| Network topology | Visual representation of your network, showing which devices are connected to which other devices |
| Hotspot | Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes |
| Hotspot 2.0 | Hotspot 2.0 is a Wi-Fi standard that enables seamless, secure, and automatic connection to trusted wireless networks |
| DHCP | Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards |
| QoS / SQM | Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e |
| DDNS | Supported >77 service providers, others can be configured manually |
| DNS over HTTPS | DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS |
| Network backup | Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| Load balancing | Balance Internet traffic over multiple WAN connections |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| 802.1x | Port-based network access control client |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| VLAN | Port and tag-based VLAN separation |
| Mobile quota control | Mobile data limit, customizable period, start time, warning limit, phone number |
| WEB filter | Block list for blocking out unwanted websites, allow list for specifying allowed sites only |
| Access control | Flexible access control of SSH, Web interface, CLI and Telnet |
| TPM | Identification and authentication module, TPM 2.0 standard |
| Certificate Manager | Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates |
| OpenVPN | Multiple clients and a server can run simultaneously, 27 encryption methods |
| IPsec | XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec |
| GRE | GRE tunnel, GRE tunnel over IPsec support |
| PPTP, L2TP | Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support |
| Stunnel | Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code |
| DMVPN | Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support |
| SSTP | SSTP client instance support |
| ZeroTier | ZeroTier VPN client support |
| WireGuard | WireGuard VPN client and server support |
| Tinc | Tinc offers encryption, authentication and compression in it's tunnels. Client and server support. |
| Tailscale | Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol |
| OPC UA | Supported modes: Client, Server Supported connection types: TCP |
| MQTT Gateway | Modbus MQTT Gateway Allows sending commands and receiving data from MODBUS Server through MQTT broker |
| MODBUS | Supported modes: Server, Client Supported connection types: TCP, USB Custom registers: MODBUS TCP custom register block requests Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII |
| Data to Server | Protocol: HTTP(S), MQTT, Azure MQTT Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting |
| DNP3 | Supported modes: Station, Outstation Supported connection: TCP |
| DLMS/COSEM | DLMS Support: DLMS - standard protocol for utility meter data exchange Supported modes: Client Supported connection types: TCP, USB |
| CPU | Mediatek, Dual-core, 1.3 GHz, ARM Cortex A53 |
| RAM | 512MB DDR3 (RUTC50 0**) 1GB, DDR4 (RUTC50 1*) |
| FLASH storage | 16MB serial NOR flash, 512MB serial NAND flash (RUTC50 0**) 16MB serial NOR flash, 8GB eMMC (RUTC50 1*) |
| Power consumption | Idle: < 4.5 W, Max: < 13.5 W (RUTC50 0**) Idle: < 5.6 W, Max: < 20.2 W (RUTC50 1*) |
| Dimensions (W x H x D) | 130.4 x 42.6 x 103.4 mm |
| Weight | 452 g |
| Operating temperature | -40 °C to 75 °C |
| Operating humidity | 10% to 90% non-condensing |
| Ingress Protection Rating | IP30 |
Phụ kiện chính