Router WiFi 5G Công Nghiệp Teltonika RUTX50

banner

DANH MỤC SẢN PHẨM

Router WiFi 5G Công Nghiệp Teltonika RUTX50

Router WiFi 5G Công Nghiệp Teltonika RUTX50

Mã SP: RUTX50

Lượt xem: 61 lượt

0 đánh giá

5G Sub-6Ghz SA/NSA cho tốc độ: 2.1/3.3Gbps DL | 900/600Mbps UL
WiFi 5 Dual-band
Antenna: (4) SMA Mobile, (2) RP-SMA WiFi, (1) SMA GNNS
(2) khe SIM, đồng thời hỗ trợ eSIM lên đến 7 profile, auto-backup
(5) GE, 1 WAN & 4 LAN
Cấp nguồn với 4-pin power connector 9 – 50 VDC
Chống chịu chuẩn IP30
Giá khuyến mại: Liên hệ
Bảo hành: 12 tháng

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh Sỉ/Lẻ
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Teltonika RUTX50: Router 5G Công Nghiệp Siêu Tốc Độ

Teltonika RUTX50 là router di động công nghiệp 5G mạnh mẽ từ hãng Teltonika, được thiết kế dành cho các ứng dụng đòi hỏi băng thông cao và kết nối ổn định liên tục. Với tốc độ 5G lên đến 3.3 Gbps, dual SIM dự phòng tự động cùng năm cổng Gigabit Ethernet, sản phẩm mang đến giải pháp kết nối tương lai cho doanh nghiệp và hệ thống IoT chuyên nghiệp. Đây là lựa chọn lý tưởng cho môi trường khắc nghiệt cần hiệu suất cao mà không lo gián đoạn.

Tính năng nổi bật của sản phẩm

- Kết nối 5G tốc độ cực cao: Hỗ trợ 5G Sub-6 GHz SA/NSA với tốc độ tải xuống lên đến 3.3 Gbps nhờ 4x4 MIMO, cùng tải lên 900 Mbps, lý tưởng cho truyền dữ liệu lớn như video 4K hoặc ứng dụng đám mây thời gian thực.
- Dual SIM dự phòng thông minh: Hai khe SIM với cơ chế chuyển đổi tự động dựa trên tín hiệu hoặc giới hạn dữ liệu, đảm bảo mạng luôn hoạt động ổn định ngay cả khi một nhà mạng gặp vấn đề.
- Mạng Ethernet Gigabit đa cổng: Năm cổng 10/100/1000 Mbps hỗ trợ VLAN và cấu hình linh hoạt, giúp xây dựng mạng nội bộ tốc độ cao cho nhiều thiết bị đồng thời.
- WiFi dual band đáng tin cậy: Chuẩn 802.11ac hoạt động trên cả 2.4 GHz và 5 GHz, cung cấp kết nối không dây ổn định cho hotspot di động hoặc mở rộng mạng nội bộ.
- Thiết kế công nghiệp bền vững: Vỏ nhôm chắc chắn, hoạt động ổn định ở nhiệt độ rộng và tích hợp định vị GNSS, phù hợp cho môi trường ngoài trời hoặc di động.
- Bảo mật và quản lý nâng cao: Hỗ trợ đa giao thức VPN, firewall mạnh mẽ cùng hệ thống RutOS và RMS từ xa, giúp bảo vệ dữ liệu và giám sát thiết bị dễ dàng.

Thông số kỹ thuật

- Kết nối di động: 5G Sub-6 GHz SA/NSA (tốc độ tải xuống tối đa 3.3 Gbps với 4x4 MIMO, tải lên 900 Mbps), fallback 4G LTE Cat 20 (2.0 Gbps DL, 200 Mbps UL) và 3G.
- Cổng kết nối: 5 cổng Gigabit Ethernet (10/100/1000 Mbps).
- SIM: Dual SIM (Mini SIM) với auto failover.
- WiFi: Chuẩn 802.11ac dual band (Wi-Fi 5).
- Định vị: Tích hợp GNSS đa hệ thống.
- Môi trường hoạt động: Nhiệt độ từ -40°C đến 75°C, vỏ nhôm công nghiệp.
- Nguồn điện: Đầu vào rộng với tiêu thụ thấp, hỗ trợ ứng dụng di động.

Ứng dụng trong các tình huống thực tế

- Tại công trường xây dựng hoặc khu vực xa xôi thiếu hạ tầng, RUTX50 cung cấp kết nối 5G tốc độ cao cho camera giám sát, máy móc từ xa và truyền dữ liệu lớn, đảm bảo vận hành liên tục mà không phụ thuộc mạng cố định.
- Trong phương tiện di động như xe RV hoặc xe tải, router mang lại internet ổn định qua 5G và WiFi, kết hợp GNSS để định vị chính xác, hỗ trợ giải trí và giám sát hành trình.
- Với doanh nghiệp công nghiệp cần băng thông cao, sản phẩm kết nối nhiều thiết bị qua Ethernet Gigabit và dual SIM dự phòng, lý tưởng cho tự động hóa nhà máy hoặc hệ thống IoT dữ liệu nặng.

Với tốc độ 5G vượt trội, thiết kế công nghiệp bền bỉ cùng thông số kỹ thuật chuyên nghiệp, Teltonika RUTX50 chính là giải pháp kết nối hiện đại mà mọi doanh nghiệp Việt Nam cần để đón đầu tương lai mạng di động.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

Download Datasheets

Thông sốChi tiết
Mobile module 5G Sub-6Ghz SA/NSA 2.1/3.3Gbps DL (4x4 MIMO), 900/600 Mbps UL (2x2); 4G LTE Cat 20 up to 2.0 Gbps DL/200 Mbps UL; 3G up to 42 DL/5.76 UL Mbps
3GPP Release Release 15/16 depending on the hardware version
eSIM Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
*Feature availability varies by order code
SIM switch Dual SIM and eSIM, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
*Feature availability varies by order code
Status IMSI, ICCID, operator, operator state, data connection state, network type, CA indicator, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list Operator block/allow list (by country or separate operators)
Multiple PDN Possibility to use different PDNs for multiple network access and services
Band management Band lock, Used band status display
SIM idle protection service Provides the possibility to configure the router to periodically switch to the unused SIM card and establish a data connection in order to prevent the SIM card from being blocked
SIM PIN code management SIM PIN code management enables setting, changing, or disabling the SIM card's PIN
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Framed routing Framed routing: support an IP network behind 5G UE
Wireless mode 802.11b/g/n/ac Wave 2 (Wi-Fi 5) with data transmission rates up to 867 Mbps (Dual Band, MU-MIMO), 802.11r fast transition, Access Point (AP), Station (STA)
Wi-Fi security WPA2-Enterprise: PEAP, WPA2-PSK, WPA-EAP, WPA-PSK, WPA3-SAE, WPA3-EAP, OWE; AES-CCMP, TKIP, Auto-cipher modes, client separation, EAP-TLS with PKCS#12 certificates, disable auto-reconnect, 802.11w Protected Management Frames (PMF)
SSID/ESSID SSID stealth mode and access control based on MAC address
Wi-Fi users Up to 150 simultaneous connections
Wireless Connectivity Features Wireless mesh (802.11s), fast roaming (802.11r), Relayd, BSS transition management (802.11v), radio resource measurement (802.11k)
Wireless MAC filter Allowlist, blocklist
Wireless QR code generator Once scanned, a user will automatically enter your network without needing to input login information
TravelMate Forward Wi-Fi hotspot landing page to a subsequent connected device
WAN 1 x WAN port 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
LAN 4 x LAN ports, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules, TTL target customisation
Firewall status page View all your Firewall statistics, rules, and rule counters
Port management View device ports, enable and disable each of them, turn auto-configuration on or off, change their transmission speed, and so on
Network topology Visual representation of your network, showing which devices are connected to which other devices
Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO authentication, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customisable themes
DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / SQM Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >77 service providers, others can be configured manually
DNS over HTTPS DNS over HTTPS proxy enables secure DNS resolution by routing DNS queries over HTTPS
Network backup Wi-Fi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
SSHFS Possibility to mount remote file system via SSH protocol
VRF support Initial virtual routing and forwarding (VRF) support
802.1x Port-based network access control client
Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS users authentication, IP & login attempts block, time-based login blocking, built-in random password generator
Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation
Mobile quota control Mobile data limit, customizable period, start time, warning limit, phone number
WEB filter Block list for blocking out unwanted websites, allow list for specifying allowed sites only
Access control Flexible access control of SSH, Web interface, CLI and Telnet
TPM Identification and authentication module, TPM 2.0 standard
*Feature availability varies by order code
Certificate Manager Certificate creation tool allows to create CA, server, client, let's encrypt, SCEP certificates
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec XFRM, IKEv1, IKEv2, with 14 encryption methods for IPsec
GRE GRE tunnel, GRE tunnel over IPsec support
PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
Stunnel Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPN Method of building scalable IPsec VPNs, Phase 2 and Phase 3 and Dual Hub support
SSTP SSTP client instance support
ZeroTier ZeroTier VPN client support
WireGuard WireGuard VPN client and server support
Tinc Tinc offers encryption, authentication and compression in it's tunnels. Client and server support.
Tailscale Tailscale offers speed, stability, and simplicity over traditional VPNs. Encrypted point-to-point connections using the open source WireGuard protocol
OPC UA Supported modes: Client, Server
Supported connection types: TCP
MQTT Gateway Modbus MQTT Gateway
Allows sending commands and receiving data from MODBUS Server through MQTT broker
MODBUS Supported modes: Server, Client
Supported connection types: TCP, USB
Custom registers: MODBUS TCP custom register block requests
Supported data formats: 8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD, DCBA, CDAB, BADC), HEX, ASCII
Data to Server Protocol: HTTP(S), MQTT, Azure MQTT
Extract parameters from multiple sources and different protocols, and send them all to a single server; Custom LUA scripting
DNP3 Supported modes: Station, Outstation
Supported connection: TCP, USB
DLMS/COSEM DLMS Support: DLMS - standard protocol for utility meter data exchange
Supported modes: Client
Supported connection types: TCP, USB
CPU Quad-core ARM Cortex A7, 717 MHz
RAM 256 MB
FLASH storage 256 MB
Power consumption Idle: < 4 W, Max: < 16.5 W
Dimensions (W x H x D) 132 x 44.2 x 95.1 mm
Weight 533 g
Operating temperature -40 °C to 75 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP30

Phụ kiện chính

  • 5 x RJ45 ports (1 WAN + 4 LAN Gigabit)
  • 4 x SMA for Mobile, 2 x RP-SMA for Wi-Fi, 1 x SMA for GNSS
  • USB A port
  • DIN rail/wall mount kit (tùy chọn)
Xem thêm thông số kỹ thuật