Giá khuyến mại: | Liên hệ |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
Cambium X7-35X là bộ phát Wifi ba băng tần với công nghệ Wifi 7 mới nhất hiện nay, được thiết kế để mang lại hiệu suất vượt trội và tính linh hoạt cho hệ thống.
- WiFi 7 Indoor chuẩn 802.11be tốc độ 9.2Gbps
- Max Data Rate Per Radio/Max Data Rate Total: 5765Mbps băng tần 6GHz & 2882Mbps băng tần 5GHz & 574Mbps băng tần 2.4GHz
- (1) cổng Uplink 2.5Gb & (1) cổng USB 2.0
- Tri-band: 6 GHz, 5 GHz, 2.4 GHz
- Quản lý bởi cnMaestro, XMS-Cloud
- Hỗ trợ 768 client, 256client/radio
- 48 SSID, 16 SSID/radio
- Bảo mật WPA3 / WPA2
- Hỗ trợ giao thức kết nối BLE / Zigbee® / Thread / Matter IOT radio
- Tính năng chuyển vùng Fast Roaming cực nhanh
- Tính năng Wifi Mesh trên cả ba băng tần 2.4 GHz, 5 GHz, và 6 GHz
5 GHz Antenna Normalized Azimuth Gain [dB] & 5 GHz Antenna Normalized Elevation Gain [dB]
2.4 GHz Antenna Normalized Azimuth Gain [dB] & 2.4 GHz Antenna Normalized Elevation Gain [dB]
6 GHz Antenna Normalized Azimuth Gain [dB] & 6 GHz Antenna Normalized Elevation Gain [dB]
IoT Antenna Normalized Azimuth Gain [dB] & IoT Antenna Normalized Elevation Gain [dB]
ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
Access Point Specifications | |
Radios |
2.4 GHz 2x2:2 with 802.11 b/g/n/ax/be 5 GHz 2x2:2 with 802.11 a/n/ac/ax/be 6 GHz 2x2:2 with 802.11 ax/be |
BLE and Zigbee |
Built-in BLE or 802.15.4 radio Max Transmit power 20 dBm with the integrated 5 dBi omnidirectional antenna gain *Matter and Thread support (*Will be supported in future releases) |
Supported data rates |
802.11be: 7.3 to 5765 Mbps 802.11ax: 7.3 to 2402 Mbps 802.11ac: 6.5 to 1733 Mbps 802.11n: 6.5 to 300 Mbps 802.11a/g and a: 6 to 54 Mbps 802.11b: 1 to 11 Mbps |
Max PHY Rate |
2.4 GHz: 574 Mbps 5 GHz: 2882 Mbps 6 GHz: 5765 Mbps |
Antenna | Omnidirectional internal antennas (Peak gain) 2.4 GHz: 5 dBi 5 GHz: 6 dBi 6 GHz: 6 dBi BLE and Zigbee: 5 dBi |
Maximum Radio Tx Power* (combined Tx power across all Tx chains) | 2.4 GHz: 24 dBm, max EIRP: 29 dBm 5 GHz: 25 dBm, max EIRP: 31 dBm 6 GHz: 25 dBm, max EIRP: 31 dBm |
MIMO Support | 2x2 (2.4 GHz, 5 GHz, and 6 GHz) SU-MIMO 2x2 (2.4 GHz, 5 GHz, and 6 GHz) MU-MIMO both in UL and DL direction |
USB Interface | 1 USB 2.0 type A port, max 1.5 W power supply |
Ethernet Interface | 1 100 Mbps/ 1 Gbps / 2.5 Gbps PoE port |
Power | Max power consumption 25.5W (802.3at) Typical power consumption with BLE / 802.15.4 radio enabled: 10.6W LLDP power negotiation support |
Dimensions |
209.6 mm x 209.6 mm x 45 mm 8.25 in x 8.25 in x 1.77 in |
Weight | Weight: 935 gm (2.06 lb) |
Mount Options | Drop ceiling T-bar, ceiling tile, 4" square electrical box, 4" round box, NA single gang box, EU single gang box, wall mount |
Physical Security | Kensington lock slot |
LEDs | Multicolor status LED Blue: Managed from cnMaestro Green: Up and running, not managed from cnMaestro Amber: Booting |
Ambient Operation Temperature | 0ºC - + 50ºC |
Storage Temperature | -20ºC - + 70ºC |
Operating Humidity | 95% RH non-condensing |
Reliability | MTBF 8,29,316 hours at +25ºC operating temperature |
Access Point Specifications, continued | |
Device Management | cnMaestro Cloud / On-Premises management (version 5.1 and above) Standalone operation mode Web access with HTTPs / HTTP protocol CLI access with SSH / telnet protocols |
Certifications (Compliance) |
FCC, IC, CE E 60601-1-2 EN 60950-1 IEC 62368-1 Safety EN 60601-1-2 Medical EMC EN 61000-4-2/3/5 Immunity UL 2043 Plenum EN 62311 Human Safety/RF Exposure WEEE REACH and RoHS *Wi-Fi certified a, b, g, n, ac, ax, be; WMM; spectrum and regulatory; Wi-Fi agile multiband; PMF; WAP2 and WPA3 PSK personal and enterprise *Will be supported in future releases |
Network Specifications | |
Security & Authentication | Open, WPA, WPA2-PSK AES WPA2-ePSK / WPA2-Enterprise WPA3-PSK (WPA3-SAE) / WPA3-ePSK / Enterprise / Enterprise-CNSA / OWE (Enhanced Open) OSEN and PMF (802.11 W) MAC authentication with local database or external database using RADIUS protocol EAP-TLS / TTLS / PEAP / SIM / AKA Hotspot WEB authentication |
Fast Roaming Support | PMK, OKC, and 802.11r for fast layer 2 roaming Seamless L2 roaming for wireless and guest clients across APs in the same L2 network cnMaestro-assisted roaming for the guest clients |
Wi-Fi Quality of Service | WMM (packet marking either with 802.1p or IP DSCP), WMM-PS, U-APSD Multicast to unicast conversion |
MESH Support | Auto-discovery and self-healing Wireless MESH support on 2.4 GHz, 5 GHz, and 6 GHz band MESH and Client SSIDs can co-exist on the same radio interface |
SSID | 16 SSIDs per radio, 48 SSIDs per AP SSID scheduling |
Client Capacity | 256 clients per radio, 768 clients per AP Max client connections limit per SSID / radio / device |
Band Steering | Yes |
Sticky Client Management | Option to disconnect the client on minimum SNR threshold |
Rate Limit | Per SSID / MAC |
Dynamic RF Channel and Power Management | Auto-Channel selection Auto-RF dynamic channel switch based on channel utilization and Wi-Fi / non-Wi-Fi interferences Auto-RF dynamic power adjustment with the neighboring APs transmit power |
WIDS and WIPS | Wireless packets flood (excessive association, authentication, de-authentication, disassociation, and EAP) detection Rogue AP, Honeypot AP detection and termination |
Wireless Users Policy Management | Standard Radius, Accounting, WISPr, and Cambium VSA attributes support COA Messages (disconnect, VLAN ID, session, etc.) support User groups with RADIUS assigned filter rules |
Wireless Devices Policy Management | Device grouping based on device fingerprinting with L2, L3, L4, and L7 access control rules |
Radius and Accounting Support | Per SSID based RADIUS and accounting server Accounting interval with start, stop, and interim messages with standard / Cambium VSA accounting attributes Up to 3 RADIUS and accounting server with failover and load balancing option Dynamic authorization and disconnect using COA messages |
VLAN Assignment | Per SSID based 802.1q VLAN tagging Dynamic VLAN assignment from external RADIUS server Local VLAN pool Radius assigned VLAN pool ePSK assigned VLAN ID |
ACL and Application Control Rules | Per SSID or device level, layer 2, 3 (IPv4 and IPv6), 4 and 7 access control rules with packet marking option Application recognition, packet marking, rate limiting, and option to drop and deny application / application category Per SSID DNS ACL option Define custom application based on IP address and monitor/control custom application traffic |
Connection Logging | Per SSID basis option to log TCP, UDP and IP connection, and DNS query NAT logging to external syslog servers |
IP Support | IPv4 and IPv6 |
Tunneling Protocols | WWAN, PPPoE, L2TPv2, L2GRE, & *VXLAN (*Will be supported in future releases) |
SNMP and Syslogs Support | SNMP v2 and v3 get operational mode Syslog messages to external syslog server |
DHCP Client and Server | Option to enable DHCP client on L3 VLAN interface On-board DHCP server with multiple DHCP pool options |
Analytics and location Service | Option to integrate Wi-Fi and BLE radios scan results with an external location analytics server through HTTP/HTTPs post |
Client Connection and Life Cycle Analytics (available with cnMaestro X Cloud) |
Exhaustive client life cycle analytics with root cause analysis Connection success and failure analytics Disconnection analytics Client dashboard with roaming history |
Services | L2–L7 application visibility & control, Wi-Fi calling control, WIDS/WIPS, NTP, Syslog, SNMP traps, DNS proxy, auto-off on WAN failure, Open roaming (Will be supported in future releases) |
API | RESTful management and statistics API presence location APIs |
Standards | |
Wi-Fi Protocols |
802.11 b: BPSK, QPSK, CCK 802.11 a/g/n: BPSK, QPSK, 16-QAM, 64-QAM 802.11 ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM 802.11 ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM and 1024-QAM 802.11be: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM, 4096-QAM 20/40/80/160/320 MHz, DSSS, OFDM, OFDMA, MIMO, MU-MIMO Multi-link operation (MLO), Multi Resource Units Target Wait Time (TWT), BSS Coloring, Transmit beamforming (TxBF) 802.11n/ac packet aggregation: A-MPDU, A-MSDU Maximum ratio combining (MRC), Cyclic delay/shift diversity (CDD/CSD), Space-time block coding (STBC), Low-density parity check (LDPC) Passpoint 3.0 IEEE 802.11 b/g/n/ac/ax/be/d/h/i/k/r/u/w |