Giá khuyến mại: | Liên hệ |
Bảo hành: | 5 |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
QNAP ES2486dc-2142IT-128G là một NAS Enterprise ZFS rackmount cao cấp dạng 2U với thiết kế dual-controller (bộ điều khiển kép), được tối ưu cho mảng lưu trữ toàn SSD (all-flash), mang lại dung lượng lớn, hiệu suất vượt trội và độ tin cậy cao cho các nhu cầu doanh nghiệp. Được trang bị bộ vi xử lý Intel® Xeon® D-2142IT 8 lõi, 128GB RAM ECC, và hỗ trợ 24 khay ổ cứng SAS 12Gb/s SSD, thiết bị này là giải pháp lý tưởng cho các ứng dụng đòi hỏi hiệu suất cao như ảo hóa, lưu trữ dữ liệu lớn, và xử lý đa phương tiện trong môi trường chuyên nghiệp. Hãy cùng khám phá chi tiết về sản phẩm này trong bài viết dưới đây.
QNAP ES2486dc-2142IT-128G có thiết kế rackmount 2U với kích thước 88.3 x 483 x 545.1 mm (bao gồm tai rack), nặng khoảng 15.61 kg (không ổ cứng), phù hợp cho các trung tâm dữ liệu hoặc môi trường doanh nghiệp chuyên nghiệp. Thiết bị hỗ trợ 24 khay ổ cứng 2.5 inch SAS 12Gb/s SSD, tất cả đều hot-swappable, cho phép thay thế ổ cứng mà không cần tắt máy. Vỏ kim loại bền bỉ cùng 4 quạt làm mát 40mm đảm bảo tản nhiệt hiệu quả, duy trì hoạt động ổn định trong thời gian dài.
Về cấu hình, ES2486dc-2142IT-128G được trang bị:
Dòng QNAP ES2486dc có hai phiên bản chính với dung lượng RAM khác nhau để đáp ứng các nhu cầu đa dạng:
QNAP ES2486dc-2142IT-128G là một NAS Enterprise ZFS mạnh mẽ với thiết kế dual-controller, mang lại dung lượng lớn, hiệu suất vượt trội và độ tin cậy cao nhờ mảng SSD toàn phần. Với 128GB RAM và CPU 8 lõi, cùng tùy chọn 96G và khả năng nâng cấp lên 512GB, khách hàng có thể linh hoạt lựa chọn theo nhu cầu từ ứng dụng doanh nghiệp phức tạp đến yêu cầu hiệu suất cao nhất.
ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
CPU | Intel® Xeon® D-2142IT 8-core 1.90 GHz processor, up to 3.0 GHz |
CPU Architecture | 64-bit x86 |
Floating Point Unit | Yes |
Encryption Engine | (AES-NI) |
System Memory | 64 GB RDIMM DDR4 ECC (4 x 16 GB) per controller |
Maximum Memory | 512 GB (8 x 64GB) |
Memory Slot | 8 x R-DIMM/LR-DIMM DDR4
IMPORTANT: You can only use one type of dual in-line memory module (DIMM) at a time. Do not use registered DIMM (RDIMM) with load-reduction DIMM (LRDIMM) memory.
|
Flash Memory | 4GB (Dual boot OS protection) |
Drive Bay | 24 x 2.5-inch
SAS 12Gb/s, backward-compatible to SAS 6Gb/s
|
Drive Compatibility | 2.5-inch bays: 2.5-inch SAS/SATA hard disk drives 2.5-inch SAS/SATA solid state drives 1. When installing SATA HDD/SSD, QDA-SA3 adapter is required.
2. The QDA-SA3 adapter is designed for QNAP Enterprise ZFS NAS and allows the use of a SATA 6Gbps drive in a 2.5-inch SAS drive bay |
Hot-swappable | Yes |
SSD Cache Acceleration Support | Read cache only |
Cache for Copy To Flash (C2F) | 1 per each controller (64GB M.2 SSD) |
Gigabit Ethernet Port (RJ45) | 3 for each controller (assign one for remote management) |
10 Gigabit Ethernet Port | 4 x 10GbE SFP+ for each controller |
Wake on LAN (WOL) | Yes |
Jumbo Frame | Yes |
PCIe Slot | 2 per controller Slot 1: PCIe Gen 3 x8 (CPU) Slot 2: PCIe Gen 3 x8 (CPU) Card dimensions for PCIe slot 1~Slot 2:215 x 68.9 x 18.76 mm / 8.46 x 2.71 x 0.74 inches.
Wider cards can be installed if the next PCIe slot will not be used. |
USB 3.2 Gen 1 port | 2 per each controller
Note: The USB ports are for engineering purpose only. No external devices such as storage drives or UPS are supported.
|
Form Factor | 2U Rackmount |
LED Indicators | System Power LED (Green): on/off System Status (Green/ Orange): in operation, system errors, low power, degraded RAID mode, memory failure, fan/power supply failure, system/disk temperature too high, storage pool reaching threshold value, system performing take-over, power supply unit unplugged LCD Status Display (Two-digit number): Status of JBOD connection |
Buttons | Power, Reset |
Dimensions (HxWxD) | 88.3 × 446.2 × 504.1 mm |
Weight (Net) | 23.4 kg |
Weight (Gross) | 27.4 kg |
Operating Temperature | 0 - 40 °C (32°F - 104°F) |
Storage Temperature | -20 - 70°C (-4°F - 158°F) |
Relative Humidity | 5-95% RH non-condensing, wet bulb: 27˚C (80.6˚F) |
Power Supply Unit | Redundant/ Hot Swap Power Vin:90~264VAC;700W |
Power Consumption: Operating Mode, Typical | 579.59 W
Tested with drives fully populated.
|
Fan | Hot-swappable fan module (60*60*38mm; 16000RPM/12v/2.8A x 3) |
System Warning | Buzzer |
Standard Warranty | 5 |
Max. Number of Concurrent Connections (CIFS) - with Max. Memory | 10000 |
Safety Standard | FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD |
FCC Class A (USA only) CE Mark ( EN55022 Class A, EN55024) EN60950 BSMI VCCI CB LVD |