Router 5G Công Nghiệp ngoài trời Teltonika OTD500

banner

DANH MỤC SẢN PHẨM

Router 5G Công Nghiệp Ngoài Trời Teltonika OTD500

Router 5G Công Nghiệp Ngoài Trời Teltonika OTD500

Mã SP: OTD500

Lượt xem: 53 lượt

0 đánh giá

(2) cổng GE (có thể cấu hình WAN)
(2) khe SIM (SIM switch) + eSIM (7 profiles)
(1) POE In (802.3af/at), (1) POE Out (802.3af Alternative B)
VPN: OpenVPN, IPsec, PPTP, L2TP, WireGuard
Chống chịu chuẩn IP55
Giá khuyến mại: Liên hệ
Bảo hành: 12 tháng

Hỗ trợ & Tư Vấn TP.HCM

Tư Vấn Giải Pháp và Kinh Doanh Sỉ/Lẻ
Kinh Doanh Bán Sỉ và Dự Án
Hỗ Trợ Kỹ Thuật Sau Bán Hàng
Kinh Doanh Bán Sỉ & Hợp Tác Đối Tác

Hỗ trợ & Tư Vấn Hà Nội

Quản Lý Chung
Tư Vấn Giải Pháp & Kinh Doanh
Kinh Doanh Bán Sỉ và Dự Án
Kỹ Thuật & Kế Toán

MÔ TẢ SẢN PHẨM

Bộ định tuyến 5G công nghiệp ngoài trời Teltonika OTD500

OTD500 là bộ định tuyến 5G ngoài trời chuẩn công nghiệp, được thiết kế chuyên dụng cho các ứng dụng cần kết nối tốc độ cao trong môi trường khắc nghiệt. Thiết bị hỗ trợ 5G Sub-6 GHz SA/NSA, tích hợp Dual SIM + eSIM, PoE In/Out, vỏ bảo vệ IP55, đảm bảo hoạt động ổn định trong dải nhiệt độ rộng từ -40°C đến 55°C. OTD500 vận hành trên hệ điều hành RutOS, tương thích hoàn toàn với nền tảng quản lý từ xa Teltonika RMS.

Tính năng nổi bật

  • Kết nối 5G tốc độ caoHỗ trợ 5G Sub-6 GHz SA với tốc độ download 2.4 Gbps và NSA với tốc độ download 3.4 Gbps, tương thích 4G LTE Cat 19 đồng thời hỗ trợ 3G để đảm bảo khả năng tương thích mạng tối đa.

  • Thiết kế ngoài trời chuẩn công nghiệpVỏ bảo vệ IP55 phù hợp lắp đặt ngoài trời, trên cột hoặc tường.

  • Dual SIM & eSIM2 khe SIM vật lý kết hợp eSIM (lưu tối đa 7 profile), hỗ trợ Auto-failover, SIM switch, Load balancing

  • Hệ thống cổng Ethernet linh hoạt2 cổng Gigabit Ethernet (có thể cấu hình WAN).

  • PoE In/PoE Out tiện lợiHỗ trợ PoE In 802.3af/at và PoE Out 802.3af, giúp cấp nguồn và kết nối camera, thiết bị mạng chỉ với một sợi cáp.

  • Bảo mật & VPN nâng caoTích hợp TPM 2.0, Firewall, NAT, DDOS protection và đầy đủ VPN: OpenVPN, IPsec, WireGuard, ZeroTier, Tailscale, GRE, L2TP, SSTP…

  • Giao thức công nghiệpHỗ trợ Modbus TCP, MQTT Gateway, OPC UA, DNP3, DLMS/COSEM, phù hợp các hệ thống tự động hóa và giám sát từ xa.

  • Quản lý tập trung RMSCho phép giám sát, cấu hình, cập nhật firmware và quản lý hàng loạt thiết bị từ xa thông qua Teltonika RMS Cloud.

ĐÁNH GIÁ VỀ SẢN PHẨM

avatar
Đánh giá:

Thông số kỹ thuật

Download Datasheets ⇓

MOBILE
Mobile module

5G Sub-6Ghz SA/NSA: 2.4/3.4Gbps DL (4x4 MIMO), 900/550 Mbps UL (2x2)

4G (LTE) - LTE Cat 19 1.6Gbps DL, Cat 18 200Mbps UL

3G - 42 Mbps DL, 5.76Mbps UL

3GPP Release Release 16
eSIM Consumer type eSIM, profile download and removal operations, up to 7 eSIM profiles; does not include data plans
SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, roaming, no network, network denied, data connection fail, SIM idle protection
Status IMSI, ICCID, operator, operator state, data connection state, network type, bandwidth, connected band, signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, data sent/received, LAC, TAC, cell ID, ARFCN, UARFCN, EARFCN, MCC, and MNC
SMS SMS status, SMS configuration, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
USSD Supports sending and reading Unstructured Supplementary Service Data messages
Block/Allow list Operator block/allow list (by country or separate operators)
Band management Band lock, Used band status display
SIM idle protection service Configure the router to periodically switch to the unused SIM card and establish a data connection to prevent blocking
APN Auto APN
Bridge Direct connection (bridge) between mobile ISP and device on LAN
Passthrough Router assigns its mobile WAN IP address to another device on LAN
Framed routing Support an IP network behind 5G UE
ETHERNET & POE
ETHERNET 2 x ETH ports (can be configured as WAN), 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3az standards, supports auto MDI/MDIX crossover
POE IN 1 x PoE In port, 802.3af/at standards
POE OUT 1 x PoE Out port, 802.3af Alternative B standard
PoE Max Power 15 W Max per port (at PSE), power supply unit dependent
NETWORK
Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPOE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL), VXLAN
VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
Connection monitoring Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
Firewall Port forward, traffic rules, custom rules, TTL target customisation
DHCP Static and dynamic IP allocation, DHCP relay, DHCP server configuration, status, static leases: MAC with wildcards
QoS / Smart Queue Management (SQM) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNS Supported >25 service providers, others can be configured manually
Network backup VRRP, Wired options, each of which can be used as an automatic Failover
Load balancing Balance Internet traffic over multiple WAN connections
Hotspot Captive portal (hotspot), internal/external Radius server, Radius MAC authentication, SMS authorisation, SSO, landing page, 9 default themes
SSHFS Possibility to mount remote file system via SSH protocol
SECURITY
Authentication Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS, IP & login attempts block, built-in random password generator
Firewall Preconfigured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64
Attack prevention DDOS prevention (SYN flood, SSH, HTTP/HTTPS), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLAN Port and tag-based VLAN separation
Access control Flexible access control of SSH, Web interface, CLI and Telnet
TPM Identification and authentication module, TPM 2.0 standard
802.1x Port-based network access control server
VPN
OpenVPN Multiple clients and a server can run simultaneously, 27 encryption methods
IPsec XFRM, IKEV1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES, GCM, etc.)
WireGuard / ZeroTier WireGuard VPN client and server support; ZeroTier VPN client support
Tailscale Encrypted point-to-point connections using the open source WireGuard protocol
Other Tunnels GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, Tinc
MODBUS / INDUSTRIAL
MODBUS modes Server, Client; supported connection via TCP
OPC UA / DNP3 OPC UA Client & Server; DNP3 Station & Outstation support via TCP
DLMS / COSEM DLMS standard protocol client; scan meter COSEM objects for automatic detection
MONITORING & MANAGEMENT
WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, multiple event log servers, Internet status
RMS / FOTA Teltonika Remote Management System (RMS); Firmware update from server, automatic notification
IoT Platforms ThingWorx, Cumulocity, Azure IoT Hub (Direct method & Plug and Play), AWS IoT Core (Jobs support)
SYSTEM CHARACTERISTICS
CPU MediaTek, Dual-core, 880 MHz, MIPS1004Kc
RAM 256 MB, DDR3
FLASH storage 16 MB serial NOR flash, 256 MB serial NAND flash
FIRMWARE CUSTOMIZATION
Operating system RutOS (OpenWrt based Linux OS)
Supported languages Busybox shell, Lua, C, C++, and Python, Java in Package manager
Development tools SDK package with build environment provided
POWER
Connector RJ45 Socket
Input voltage range 42.5-57.0 VDC (PoE), reverse polarity protection; voltage surge/transient protection
Power consumption Idle: < 2.5 W / Max: < 9 W / PoE Max < 24 W
PHYSICAL SPECIFICATION
Casing material Plastic (PC+ASA)
Dimensions (W x H x D) 110 x 49.30 x 235 mm
Weight 385 g
Mounting options Mounting bracket (for vertical flat surface or pole mounting)
OPERATING ENVIRONMENT
Operating temperature -40 °C to 55 °C
Operating humidity 10% to 90% non-condensing
Ingress Protection Rating IP55
Xem thêm thông số kỹ thuật