| Giá khuyến mại: | Liên hệ |
| Bảo hành: | 12 tháng |
Hỗ trợ & Tư Vấn TP.HCM
Hỗ trợ & Tư Vấn Hà Nội
MÔ TẢ SẢN PHẨM
TRB143 là dòng gateway 4G LTE công nghiệp được thiết kế đặc biệt cho các ứng dụng thu thập dữ liệu đo lường thông minh nhờ tích hợp M-Bus interface chuyên dụng.
Thiết bị sở hữu thiết kế nhỏ gọn, vỏ nhôm chắc chắn và khả năng hoạt động ổn định trong các môi trường công nghiệp khắc nghiệt. TRB143 chạy trên hệ điều hành RutOS, cung cấp đầy đủ các tính năng bảo mật và tương thích hoàn toàn với Hệ thống Quản lý Từ xa (RMS) của Teltonika.
Tính năng nổi bật:



Hình ảnh chi tiết mặt trước và sau của Gateway TRB143


ĐÁNH GIÁ VỀ SẢN PHẨM
Thông số kỹ thuật
| MOBILE | |
| Mobile module |
4G (LTE) – Cat 4 up to 150 Mbps DL, 50 Mbps UL; 3G – Up to 21 Mbps DL, 5.76 Mbps UL; 2G – Up to 236.8 kbps DL/236.8 UL kbps |
| Status | Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID, MCC, MNC, LAC, TAC, Cell ID, ARFCN, UARFCN, EARFCN |
| SMS | SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP |
| USSD | Supports sending and reading Unstructured Supplementary Service Data messages |
| Black/Allow list | Operator block/allow list (by country or separate operators) |
| Band management | Band lock, Used band status display |
| APN | Auto APN |
| Bridge | Direct connection (bridge) between mobile ISP and device on LAN |
| Passthrough | Gateway assigns its mobile WAN IP address to another device on LAN |
| ETHERNET | |
| LAN | 1 x RJ45 port, 10/100/1000 Mbps, compliance with IEEE 802.3, IEEE 802.3u, 802.3ab standards, supports auto MDI/MDIX crossover |
| NETWORK | |
| Routing | Static routing |
| Network protocols | TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL) |
| Connection monitoring | Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection |
| Firewall | Port forward, traffic rules, custom rules, TTL target customnisation |
| DHCP | Static and dynamic IP allocation, DHCP Relay |
| DDNS | Supported >25 service providers, others can be configured manually |
| Network backup | Mobile, VRRP, Wired options, each of which can be used as an automatic Failover |
| SSHFS | Possibility to mount remote file system via SSH protocol |
| SECURITY | |
| Authentication | Pre-shared key, digital certificates, X.509 certificates, TACACS+, Internal & External RADIUS, IP & login attempts block |
| Firewall | Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI, DMZ, NAT, NAT-T, NAT64 |
| Attack prevention | DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) |
| Access control | Flexible access control of SSH, Web interface, CLI and Telnet |
| VPN | |
| Services | OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard, Tinc |
| MODBUS / MBUS | |
| MODBUS TCP | MODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Client functionality |
| M-Bus interface | Up to 250 client devices and can power up to 6 client devices. |
| MQTT Gateway | Allows sending commands and receiving data from MODBUS/M-BUS Master through MQTT broker |
| MONITORING & MANAGEMENT | |
| WEB UI | HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log |
| FOTA / RMS | Firmware update from server, automatic notification; Remote Management System (RMS) |
| IoT Platforms | ThingWorx, Cumulocity, Azure IoT Hub, AWS IoT Core, Cloud of Things |
| JSON-RPC | Management API over HTTP/HTTPS |
| SYSTEM CHARACTERISTICS | |
| CPU | ARM Cortex-A7, 1.3 GHz |
| RAM | 256MB, DDR3 |
| FLASH storage | 512 MB, SPI Flash |
| FIRMWARE CUSTOMIZATION | |
| Operating system | RutOS (OpenWrt based Linux OS) |
| Development tools | SDK package with build environment provided |
| POWER | |
| Connector | 4-pin industrial DC power socket |
| Input voltage range | 12 – 30 VD |
| Power consumption | Idle: 3 W, Max: 6 W |
| PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM) | |
| Ethernet / M-Bus | 1 x RJ45 port, 10/100/1000 Mbps; 1 x M-Bus interface |
| Status LEDs | 3 x Connection type status, 3 x Connection strength, 2 x ETH status, 1 x Power |
| SIM / Antennas | 1 x SIM slot (Internal Mini SIM-2FF); 1 x SMA for LTE |
| Reset | Reboot/User default reset/Factory reset button |
| PHYSICAL SPECIFICATION | |
| Casing material | Aluminum housing |
| Dimensions (W x H x D) | 74.4 x 25 x 73 mm |
| Weight | 145 g |
| Mounting options | DIN rail, wall mount, flat surface (all require additional kit) |
| OPERATING ENVIRONMENT | |
| Operating temperature | -40 °C to 75 °C |
| Ingress Protection Rating | IP30 |